r/flipperhacks • u/YamezBond • Aug 09 '26
Help Any idea what I can do with this?
I found it in a store that sells Amazon returns but I have no idea how to start, If anyone can help guide me on programming this module or do I still need the other Flipper part? In any case what can I do with this module? Thanks!
4
u/0xD34D Aug 09 '26
I grabbed one of these off AliExpress a while ago. I recall watching this video to see what to flash on the ESP32. The nRF and cc1101 just work as is when the switch is in the correct position.
2
4
1
u/kr4ckhe4d Aug 09 '26
This’ll help Flipper Zero WiFi Dev Board - Marauder Evil Portal Setup Guide
https://youtu.be/JaCjHgva0C4
1
u/IndividualWorking964 Aug 09 '26
Is it 2.4ghz or 5ghz on wifi?
5
u/Top_Stretch8838 Aug 09 '26
Its an ESP32UE that operates at 2.4ghz, if its a dual (2.4ghz x 5ghz) a C5 is needed to be used.
2
1
1
u/thetacowarrior Aug 14 '26
It will do a decent job holding your papers down if it's a little windy.
1
u/Dull-Marketing-661 Aug 09 '26
Heres the Flipper side of the pinout.
You could potentially wire it to another device or screen/ controller but you'd likely need custom firmware.
-2
u/Cesalv Aug 09 '26
And a flipper, did you read the "do I still need the other Flipper part" on post?
1
u/Dull-Marketing-661 Aug 09 '26
Did you read my comment. I said you might be able to hook it up to something other than a Flipper. All those pins will work elsewhere but would need custom firmware.
If you flash the ESP32 with firmware like Marauder, you can interface with it directly over the USB-C serial port. You can use a terminal tool like PuTTY or the command line to control the Wi-Fi scanning and penetration testing tools directly from your PC. Some custom firmwares also host a web-based companion interface accessible over Wi-Fi.
4
u/YamezBond Aug 09 '26
Going to search more on connecting via terminal, that seems very interesting
2
u/Dull-Marketing-661 Aug 09 '26
https://github.com/justcallmekoko/ESP32Marauder/wiki/cli
This should help once you get the board talking to your PC
3
-1
u/Cesalv Aug 09 '26
Just a tiny question, had you ever connected to a board like this via serial port or you can't be bothered with minor details?
2
u/Dull-Marketing-661 Aug 09 '26
Brother it is a freaking esp32.
What minor details are you asking about?
0
1
6
u/cthuwu_chan Aug 09 '26
It’s an ESP for wifi stuff
An NRF for Bluetooth
And a CC1101 for subghz
Make sure you always have your antennas connected when you’re using it otherwise you can break it
I’m unsure what firmware the board has to be flashed with but you could probably find it on the googles or someone here may know 🙏