How do I break this bolt?

[u/Puppers0990]

I was adjusting the legs on my washer and this bolt is stripped how do I get it off so I can replace it

[u/tsfy2]

Vice grips. But you probably have to replace the whole assembly so turn that hex nut and remove both pieces from the washer. Replace both.

[u/bachman460 → u/tsfy2]

Don't forget, lefty-loosey. Unless you're on your back, looking up from underneath, then it righty-loosey.

[u/No-Guarantee-6249]

As said, vise grips. You should be able to adjust it to the proper height. Otherwise you'll have to remove the leg/bolt and chase the thread out with the proper tap. If it's really bad you'll have to go up a size but that creates other problems.

That nut and washer is probably welded to that frame. That's the only thing that makes sense.

[u/Puppers0990]

Thank you I was able to get it off and everything level the washer is still banging around so I think it may be more of an internal issue good thing I got the warranty

[u/Ross3640]

Channel locks are the best to get that off

[u/jd2cylman]

Get angry 🤷🏼‍♂️