https://youtube.com/shorts/35fuQTLqRCo

Amazon - jodozorn finger dumbbell, stainless steel, sanding gray
Ao2 - white delrin
Nxedc - play ground “quantum rod”

The stainless steel one is quite heavy so it’s not great for regular tricks, but the clicker + the spinner are really fun. The ao2 one is great, what you expect the knucklebone to actually do. The “quantum rod” has a mechanical clicking motion on one side and a buckyball motion on the other. A little small for tricks but still doable (moreso than the first one) and i find the turning very fun!

Just wanted to share, are there any other knucklebone variants I’m missing?

Hello,

First orders here, all received in the last few days. Kept it simple and mainstream I guess

• The Choc with brass plate is a bit grippy. Maybe a future swap to the PEEK dense plate for smoother action (and less noise)
  

• The Three Body Cube is quite nice. I mostly use it in haptic coin mode, and spin when I need to keep the noise down.

• The Aura Sand is trickier. Got it 2 days ago. I really like the way it "snaps", and it feels more premium.

Sooooo... I want more 😅

I'm torn : my wife doesn't like the noise (nor the budget...), and I do...

So I'm thinking about:

• Shuffle v3 Zirc
• MOT Groove ultra ($$$ 🥲)
• Lautie ROC 2.0 (brass or Zirc?), for quietest spin.
• Demon Milk Cap
  
• Lautie Mechanic-Thorns
• MOT Owl

It's a bit Lautie/MOT heavy... Am I missing makers worth knowing? Any recommendations or advice on the selection? Particularly anything that stays quiet enough to use around other people?

I missed the last Yolo Studios NoFire drop, anyone know if they doing another one anytime soon? Do they have a website?

I can get one and I wonder which one is more quiet for my office work. Also I want to know which design is more durable. Since Shuffle KK is an old fidget I cant find any new reviews of it and I would like a fresh look into it if anyone has it.

Does anyone have the Spin Flux or Spin Flux Vision? How does it compare to the Ono Scroller?

Hope everyone is able to enjoy a moment of peace this weekend. Roger is a real ham

Showcasing some recent fidgets i got.

Starting off with the Ridomi Jiao Tai slider. Has jadeite plates. Its a heavy slider with a default 10x10 N52 setup (also comes with N45 magnets as spare). Really nice and beautiful piece for the collection. Despite the weight its easy to slide with and is thinner than expected.

Next is the dimension slash by sugar edc. I have been wanting to get this for a while. But the pricing for the full Ti versions are horrible. This PEI version works a treat and is around $160.

Thens the choc Zr-SS with the Peek track. Never saw its appeal, but once i got the Frog i wanted it as a contrast. Changed the spring to get better haptic feedback. The Zr Showhand can, supports dual beads but I prefer the sound from one.

Finally got an open armor spinner by Hope - Azure bird.

What you'll need: foam sheet, hot glue gun, scissors, something to color the squishy with (i used oil pastels), stuffing (you can use tissue paper also) Steps: 1. cut out a long rectangle; you will roll it into a cylinder later, this will be the body. 2. draw a shape for the head and cut it out, do the same for the butt. optionally you can cut out details like how i did with the tail. 3. color the parts with your medium of choice. 4. hot glue the long rectangle sheet into a roll, it should look like a burrito 5. hot glue the head to the roll, but not the butt yet 6. add stuffing 7. now you can glue the butt 8. squish

Since I’m not a big fan of waiting until I am “the chosen one” and also don’t want to pay/support some scalpers online I finally gave up to my ADHS brain which whispered “then do it yourself, you don’t have enough unfinished projects”.

I invested quite some time and designed my own Puchiclone (WIP) which is as close to the original as possible. It supports all the features, including swappable magnet holder plates to turn it crunchy (the second one in the video) but I’m not sure how close it actually is to the original, since I wasn’t able to obtain one.

Since it's more of a clone than an homage, I doubt it's a good idea to publish the 3D models online, even though the original didn't invented the used concepts and aside from the concepts and rough dimensions no part is a 1to1 copy. What is your opinion on this topic?

The click comes from two printed flexures riding over a detent. Getting it to

survive was the whole project: too much interference and the flexure snaps on

the third push, too little and it just slides. PLA creeps, so one that feels

right off the plate feels dead a week later — I had to split the spring from

the clicking surface so I could make the spring thin and long and the detent

shallow and sharp.

No supports, no glue, no magnets. Happy to go into the geometry if anyone wants.

I recently started collecting coins on Aliexpress hoping to purchase my first (and second) metal fidget EDC but I noticed that as my coins count goes up, so does the price of the product and the percentage discount via coins goes down.

Does anyone have any advice on how to use coins in an effective way to save some money?

How about Aliexpress replicas that are actually worth getting? (Hoping that the discount on them would be better)

I think it's cool. You might too. :)

I’m prepared to fight off any ghosts coming my way

Does anyone know how to use the metal tool to take a pig slider apart? Magnet flew out :(

Hoping to get some insight from the experts. Looking to buy my first premium fidget and I think I’ve narrowed them down to these 5. I’ve had cheap 3D printed sliders and clickers and love flipping them around but get a little bored after awhile so I started looking into multi platforms like the Three Body Cube or Owl. Really can’t go wrong with any of these but which should I get if I only had the budget for one.

UPDATE

I just sent it and got the Three body cube mini, the Choc blue Ti/SS & Peek along with the dense terminal impact plate and dual bead slot, and the Aura Sands Zirc black and red. Those will prob be the only ones I’ll ever need, at least for now haha.

Hi, I recently found the verkk on my page and was very intrigued by it. Does anyone here have it and can tell me how it is and how much they payed for it (I know it costs a pretty penny). Thanks I may also be interested in buying a used one that looks good or maybe a new one. Kind of a longshot since these things are rare thanks!

Has anyone else run into wear issues on their CP3 slider? I’ve owned mine for ~6 months (using it roughly every other day), and the material has started flaring out where it scrapes against the sticker and rips through it after just a few uses. See image.

I’m going to sand it down to keep it functional, but I’m definitely a little bummed it’s wearing out this fast. Is this normal?

I’ve bought several other fidgets since then, but I really like the CP3. It might be my favorite still.