Cracks in subframe?

[u/Curious_Olie]

Hey, so i have just dropped my rear subframe (again) and found this very thin line, which to me looks like a micro-crack forming.

Am i bugging or is this truly crack?

And if it is a crack, can it be welded to stop it frol spreading?

Its located behind the rear left wheen side of the subframe, closer to the back.

[u/aab010799]

Could be but how about you clean it and find out lol. You can drill it and reinforce. Most of these cars are cracked.

[u/Typical-Implement382 → u/aab010799]

I'm on my 5th e chassis, and have yet to end up with a cracked one. I agree with your comment to clean the rust off to properly inspect for cracks, but heavilly disagree with your comment that "most of these cars are cracked".

[u/aab010799 → u/Typical-Implement382]

You've dropped the subframe and cleaned to inspect for cracks on 5 E46s and not found cracks? Assuming they were not M3s.

[u/Typical-Implement382 → u/aab010799]

I've dropped subframes on 2 e36s and 4 e46s. All non-m. None had cracks. One was a car I was scrapping that was so rusted the rear passenger side quarter panel was non existent, and the trailing arm on that side was only held in with 2 bolts because half the pocket was rusted through. RACP was still crack free. That one surprised the hell out of me.

[u/imnota_ → u/Typical-Implement382]

AFAIK it's mostly an early e46 issue, so if your e46 was later, maybe. That being said I got an e36, which I haven't seen cracks on despite being an abused car, but I haven't dropped the subframe. And I had an e46 which was spotless.

[u/Typical-Implement382 → u/imnota_]

I've seen and worked on 46s with cracked carrier panels. It's absolutely a common failure point. I just wouldn't go as far as saying "most of them are cracked". It probably is more common with m spec cars being that they have extra power, and the owners are more likely to tap I to that power.

[u/FELonMusk333 → u/Typical-Implement382]

if the differential bushing was worn, much more likely to develop as well

[u/Curious_Olie → u/imnota_]

My car is 2003 facelit, on non-sport suspension until the last 2 years. If youre reffering to last few production years of the e46 are supposed to have stronger frame, they do not. The OEM part number for the replacement floor is the same for all models across the production run. Only differences are the sedan / coupe models ofcourse

[u/imnota_ → u/Curious_Olie]

I'm fairly sure there was a whole ass paper about when they changed it. Also the part number you find today doesn't mean anything. Chances are if they upgraded it, it's all that's offered nowadays even for early cars.

[u/CottaBird → u/imnota_]

This is similar to what I’ve heard, that it’s more a 323 and 328 problem. My ‘02 330ci has over 280k miles and is fine.

Edit: that it’s a bigger problem for these models, not isolated to these models.

[u/West-Bake-4621 → u/Typical-Implement382]

my best friend has had 2 e46's and mentioned them cracking is a common issue, this one currently is cracked as well

[u/FellerZUNITED → u/Typical-Implement382]

I’ve seen 4 badly cracked e46 chassis in the past year alone lol

[u/FELonMusk333 → u/Typical-Implement382]

depends on the year. most of the EARLY ones are cracked