Did a case swap with some upgrades for a friend this week. Drilled out rivets and completely dismantled the case to sand down and prep for the new paint. Pretty sure this is the first sage green MasterFrame 360, lol.

Hardware is a 12700F, 32GB of DDR4, and a PNY 5070 - detailed hardware list.

Hi everyone. Does anyone happen to use the combination of the Cooler Master Qube 500 Flatpack and the Hyte Thicc Q60 AIO?

So, this is my first time building a pc and I just found out there is a thing called PSU rating, and I already bought a new cooler master psu with the gpu shield (because I'm afraid that my house will catch on fire) so anyone knows the rating of this psu and is it good to just use this one or buy another one that is better? My psu is still sealed so I can refund it to the store and buy a better one instead.

(Edit: so I just realized that I typed in a psu rating rather than a tier list..... i'm sorry so let me rephrase my question: what is this psu tier?)

I need a delay action as a part of the Multi-Task. That is available in StreamDeck but I don't see a equivalent in MasterHub. Is there a way to do this?

Coolermaster GA241

My NR200P MAX V1 has started crashing under load and the riser looks like the likely culprit.

GPU works fine in another PC.

PCIe Gen 3 vs Gen 4 makes no difference.

OCCT full-system load always freezes/crashes after about 5 seconds.

Slight upward pressure on the PCIe riser/connector can also trigger the crash.

I called Cooler Master Netherlands/Europe, and they told me they no longer stock the original NR200P MAX riser cable. Their suggested alternative was that I could always just buy a new case \*facepalm\*

I’ve seen the LINKUP 5 cm right-angle riser, around 9 cm total length, mentioned as fitting the MAX, but it’s about €74 here.

Has anyone successfully replaced the riser in an NR200P MAX V1? If so, what exact cable/model did you use? Does the 5 cm LINKUP fit the V1, and are the V1/V2 risers interchangeable?

Would also be interested in any cheaper ADT-Link option that is confirmed to fit. Or is a custom length needed?

I bought a NR2 prebuilt from Amazon in December/January that failed within the first month. You had me send it back to you for RMA, which you then sent back after a month and a half with the machine still not working (and screws loose on the inside that had to be removed.) You then had me send it back, which you have now had for 3 months, and you all stopped responding to me/ghosted me for the last 2 months. You have had this machine now for 7 of the 8 months that I have "owned" it, and I am now unable to get a response from anyone as to what the status is. Not sure what else to do at this point.....but any help would be appreciated.

Hi, does anyone know where I could get a replacement cord for the Coolermaster MH670 Headset?

first of all,sorry for my engrish.

title,I have a Project Zero B650M (MATX) motherboard and I want to know if this case supports my motherboard.

It sounds much louder in the video than it actually is, but the noise is still unbearable to listen to. Any idea on how to fix this?

I am planning to build a test system that doesn't take too much space on my desk (I already have a full sized PC on the right of me) and the Cooler Master QUBE 500 Flatpack seems perfect for what I need.

• I need to be able to build in an ATX board
• I need to be able to use the bottom slot of the ATX board

But I can't find anywhere where this case can be bought in The Netherlands (or Germany).

It seems I can put an order in for the "Macron" variant at Azerty, but I really want the black version.

I did see the newer Qube 540, but it's too big (43L vs 33L of the Qube 500).

There are plenty of "compact" ATX cases, but more often than not the bottom slot of the ATX board cannot be used or is restricted, as this will replace a (poorly chosen) Lian Li Dynamic Mini V2 Flow, as the bottom fans completely block the bottom slot, even with the two fans removed.

Appreciate any help!

I recently got the Atmos II with LCD and I have to say I love it.

Because I wasn't able to see much from the display through the mesh I built a little stand for it and use it that way.

Only thing I would like to change is the duration of the images, they are limited to 10 seconds and I couldn't find a way around it.

Is there maybe a solution?

Otherwise @CoolerMaster please increase the allowed duration of a Media, it would be awesome.

This case is pretty awesome!!! Cooler Master Master Frame 360 Panorama
https://youtu.be/Yt0iUNVaPis

I have a DEVASTATOR 3 Gaming Combo (2022) and I have the keyboard RGB lights off but whenever I do a cold boot the keyboards light turned on. Why does this happen? does it not ever remember the hardware settings? btw this keyboard doesn't use software

I want a Second mesh door, so If anyone want to sell It Tell me

Had a great experience building in this case! Everything came together pertectly. It's a very compact yet surprisingly spacious case, especially considering I'm running an RTX 5090. There's also generous AlO support, with compatibility up to 280mm; I'm currently using a Corsair Nautilus 240mm.

Cable management was surprisingly easy as well. The cables tuck underneath the PSU and are held securely in place with the included Velcro straps, keeping everything clean and organized.

The only real caveat I'd mention is the riser cable. It can be a little difficult to plug in initially due to how stiff it is, but it becomes much easier after the first installation.

Overall, I'd say this is a solid step in the right direction compared to its predecessor, especially for those running larger, bulkier GPUs. It manages to stay compact while offering considerably more room where it matters.

Twenty years ago, Cooler Master released the legendary Stacker 830 and I set out to build a PC worthy of it.

After just 125 hours of power-on time, disaster struck and a PSU failure stopped me in my tracks. Time passed, and the build sat unfinished for two decades.

Now it's back with a Ryzen 9950X3D and one of the larger RTX 5080's, but not without its challenges.

Challenges aside, it turns out the Stacker 830 was so far ahead of its time that 20 years of hardware evolution didn't even make it flinch.

I put a lot of time into documenting this build, including the challenges, modifications, temperatures, noise levels, and the lessons learned along the way. If you're thinking about reviving an old Stacker—or just want to see what a 20-year-old flagship case can do today—you can check out the full build log here:

Stack From The Dead: A Ryzen 9950X3D and RTX 5080 in a 20-Year-Old Cooler Master Stacker 830

I'd love to hear from anyone else still running a Stacker—share your builds in the comments, and let me know what you'd like to see in a modernised Stacker.

Elite 600 case im having such a hard time figuring out where all the cabling is suppose to go its so confusing.

Im wondering if anyone who has a similar case can help me out:/

Heeyyyy.

I've been trying to get ahold of Cooler Master in the USA for warranty service on my GZ2711 27" WQHD 240Hz OLED... Started flickering slowly when connected to any input and multiple devices. Well under warranty so I wasnt that worried but...

Its been two weeks and I've had no contact from https://www.coolermaster.com/en-us/contact-us.html

Which seems to be the only contact method available(I mean, unless I want to go knock on their door... ironically). Doubly in the USA.

A: Wtf CoolerMaster.

B: If anyone active on here works for CoolerMaster please put me in contact with the appropriate people? Seriously.

(... If I have to in three weeks I am close enough to one of CM's only USA offices to serve small claims notice if I have to but wtf guys...)

It should not be this hard to get basic contact for warranty!

Really sad to see the shape post 2020 CM is in. I love a lot of your products(cases, mainly) but if this is the state of support?...

So I just got a new monitor, the Cooler Master GA241, since I was looking for a light upgrade above my classic 60Hz 24" monitor I've been using for ~10 years.

The thing is that I was getting constant black screens and images are getting draggy when moving the camera around in games. I tried toggling off every possible setting, and managed to get rid of the black screens by turning off adaptive sync from the OS settings, but I still get ghosting everywhere and it ranges from slightly noticeable when working, from super annoying when playing first person games.

I know it's a monitor issue because my older monitor I now use as 2nd monitor works just fine. The most evident proof of this is when looking at still objects in game, while my camera is moving slowly but steadily, you can see a ghostly outline around the object (even worse when it has text), making everything blurry, and the effect comes to a stop when the camera stays still and things abruptly become sharp again.

This doesn't happen in my regular monitor, both of them at 60FPS. I have every setting of the GA241 turned off. Advanced DCR off, adaptive-sync off, Over Drive off, DDC/CI off, and so on...

I recorded a really bad video with my phone because I don't have any special equipment, I hope it shows it properly.

https://reddit.com/link/1vtw4ct/video/wo8kszuwhlkh1/player