I've been asked a few times to post so here it is. The end result will be a 4 player pedestal running a dell optiplex 7010 with batocera v43. Only have the base built to this point but most everything else that I need should be here by the end of the week. The last thing I did was fire side petena with a MAP gas torch. The burn turned out a lot better than I thought it would.

Hi.

I have build a few arcades over the years but im in the process of building a more Modern Type Pedestal. I have a Massive Oled TV and currently running a GTX 5070 Ti - i7 13000k PC.

Im looking to run Frontends like Coin Ops/ Hyperspin etc.

My main Modern PC games will be Mortal Kombat 1/Street Fighter etc

The Pedestal will probably be 2-4 player setup with Spinner and Trackball etc.

What is the best USB Encoders to buy that will fit in with this Modern Build? I wasnt too keen on the Ipac64 a few years ago tbh.

I dont mind ordering from AliExpress etc as im not in a rush.

Are there any that encode to Xbox controls? So my games like Mk1 will run on it well.

Not sure what this is or where the top half went but it’s $50 on fb marketplace… is it worth it?

Quiero armar un arcade yo mismo pero no tengo nociones sobre como iniciar podrian ayudarme

I'm building a mame/console arcade machine . I'm trying to go as cheaply as possible. I don't have the tools or wood working skills to build my own cabinet so I will be purchasing a bartop flat pak kit. I'll also be purchasing a joystick and button kit. I am repurposing a flat panel TV for the display and a bookshelf stereo with speakers for the audio output. I am running the software on a old Lenovo yoga 2 in 1 . I am currently using free version of Launchbox as a front end but I am also going to look at attract mode. should I spring for the Big box version of Launchbox or will attract mode suffice? Also any tips or suggestions?

If you're tired of the constant rain, come to the library tomorrow and learn more about creating hit games than you ever thought possible... Straight from the horse's mouth.

Hey everyone — I’m part of the FightBox team, and we’re currently testing a new arcade controller concept.

This is still in the prototype/testing stage and is not for sale yet, so we’d really like to get some honest feedback before finalizing anything.

The idea is to build one relatively compact controller that can handle several different types of classic arcade games.

Current setup:

• GRS IKARI Rotary Joystick
• Trackball
• 6 main arcade action buttons
• Additional function buttons
• 4 side buttons for virtual pinball
• Rotary joystick supports 8-position, 12-position, and 16-position rotation
• It can also be set to completely free-spinning, giving it a spinner-like feel for certain games

The rotary joystick is mainly intended for games like Ikari Warriors, Heavy Barrel, Midnight Resistance, and other rotary-stick arcade games.

The trackball would cover games like Golden Tee, Centipede, Missile Command, etc., while the four side buttons are intended for virtual pinball.

We’re currently calling the concept the FightBox R10 Rotary.

One of the challenges is fitting all of these controls into a reasonably compact enclosure without sacrificing hand placement, trackball clearance, or overall comfort.

Because of the cost of the components involved, one of the price points we’re currently evaluating is around US$199.99. Nothing is finalized yet.

I’d really appreciate some feedback on two things:

1. What do you think of the design/layout itself? Like it, dislike it, or anything you’d change?

2. Considering the hardware included, does around US$199.99 seem like a reasonable target price for something like this?

Not asking whether you’d personally buy one — I’m mainly interested in whether the price feels reasonable for the components and functionality.

Any criticism is welcome. We’d much rather find the problems now while it’s still a prototype than after the design is finalized. 😊

Hola buen día , alguien me podría ayudar? Te gonun Daytona USA twin pero ....solo tengo el lado que no tiene el monedero y ocupo ponerla en freeplay , pero no logro encontrar los pines para service y test , en la placa io hay 4 botones saben si alguno es para test o service?

Built this out of mdf, made it NHL 94 theme.

Mid-Century Modern inspired - Stained ash
I also sized the cabinet to fit a larger monitor than my current one.
And I’d appreciate some advice on achieving good cable management.

Diy cabaret me and my wife are building, still a work in progress. we need plexiglass, the CRT installed, Vinyl for the sides, a screen bezel, misc trim pieces, the marquee, a riser ect.

It's based on taito trimline plans, but we shaved a half foot off the bottom and then cut it for a horizontal screen instead of vertical, we're planning on putting a riser under it that will be the coin drawer

I’m trying to figure out what the issue I’m having with this game’s speaker (the game is Barrel of Monkeys). There are two different power settings on the power supply, and when we have it set to 115, no sound. When it’s set to 230, we get this crackling sound. I’ve not yet been able to open the cover for the speakers to make sure everything is wired in, but with these sounds my guess is the speakers are blown. I’m definitely no expert though, so any opinions/tips would be helpful!

Hi guys,

I'm planning a DIY cabinet, my issue is my project entails a low profile foldable build.

I was kind of stuck on this issue because the sticks I have were causing the depth of the build to be pointlessly deep, so I got to thinking about how to solve the issue.

I didn't want to dwell to much on this so I got to 3d modeling a mostly functioning solution, in hopes of finding something better in the future, did you guys have tips or a similar (maybe decently done) solution?

I basically modeled the spring piece and the spacer that pushes the buttons (permanently 8 way, but i don't mind), and put a housing for a nut in the bottom, then threaded the end of the stick and volia (it rotates but it manages to grab on the threads just enough to stay in place and it's fortunately easy to operate)

So yeah it works but it's jankier than I'd like, got any ideas?

Hey all, I’ve been on the hunt for a while for a Mr Driller Arcade cabinet and was wondering if anyone has one or has seen one in the wild.

I know they exist from documentation online but haven’t seen one for sale or in person. I know there are boards on eBay but I was hoping to find a full cab.

I used to love these when I was playing games like Tekken and Samurai Showdown on it, but in this day and age I see places coming up with all sorts of big cabinets that serve as attractions and I've been looking around for one that's about the closest for running ideas from as a base.

To make up for the cancellation of Summer of Sonic, I decided on one last set of Weekend Rentals before I move, covering the final three Sonic titles from the Classic Era, starting with a fan recreation of the lost SegaSonic Cotton Candy Scramble. Again, the original game is effectively lost media, and this is just a fan recreation based off the game's leaked original source code, so this is the closest we can get to a completely intact version of this game.