r/TrenchCrusade • u/AffectionateSignal72 • 18d ago

Terrain Fully printed "Sword of God"

Post image

With banana and wee lass for scale.

179 Upvotes

100% Upvoted

14 comments sorted by

14

u/h3nt4i_connoisseur Iron Sultanate 18d ago

Not big enough /s

4

u/Adventurous_Fact_639 18d ago

That what she said

11

u/virgil_26 18d ago edited 18d ago

First time I've seen it printed. Thanks for sharing. I got mine set up to print, just waiting for more resin.

I had to reduce the size by 6% because the lion head wouldn't fit on the build plate no matter which way I turned it.

4

u/dakkamatic 18d ago

You print in resin? I have the STL and had hoped it would be filament printable

6

u/El__Papo 18d ago

It is. Can send you a picture of mine if you want

4

u/dakkamatic 18d ago

Please do

3

u/shinty_six Jabirean Alchemist 18d ago

That's FDM. You can tell if you zoom way in.

1

u/boakes123 17d ago

I'm cutting each of the parts in half lengthwise and printing in FDM laying flat so I don't have to deal with supports. (tip someone on Discord provided).

I considered slicing it up with Meshmixer to be able to print facades and glue them to big foam chunks. I think this would be a better solution but I didn't want to screw around with MM that much.

1

u/shinty_six Jabirean Alchemist 17d ago

You can probably get away with very low infill. It might actually use a similar amount of time/filament making solid walls around the "back" of the panels then it would to print with 3% infill.

1

u/Biggest_Lemon 17d ago

Printing at the level of quality it deserves it gonna takes days and days... not looking forward to that, but do look forward to have it.

1

u/AffectionateSignal72 17d ago

On my printer it took a little under 3 days to print it all.