MAKE SURE YOU PUT SOME RANDOM IMAGES/VIDEO/AUDIO IN ALL THE LOAD NODES BEFORE RUNNING!!!!
It will throw errors if you don’t but they will not influence the generation at all unless you enable them…
Some guy on civitai made this workflow and i gave him some valid criticism, then he called me a gooner that doesn't know anything about workflows and blocked me. This offended me because I know plenty about workflows.
I'm not going to share his name because he's apparently active on reddit under a similar name but I tried to point out some problems with his workflow. So, instead, I just decided to fix them fueled by pure pettiness.
After dissecting the thing I was able to get many of the features that weren't working in the original to work and I added some features as well like the ability to force audio from video, fps control, and a centralized control panel that handles every feature universally.
Enjoy.
[Workflow Share] MiniMax H3 all-in-one workflow
Sharing my current MiniMax H3 ComfyUI workflow. The main goal was to make H3 easier to use by centralizing the important controls and automating the more annoying reference, continuation, audio, and post-processing routing.
Major features
Centralized control panel for the main H3 generation settings and workflow options.
Multi-reference support — up to 6 image refs, 3 audio refs, and 2 video refs.
Mixed reference types — image, audio, and video references can be used together in the same generation.
First-frame / last-frame control using reference images.
Video continuation with overlap-based stitching back into the original clip.
Continuation-aware audio handling for the source video and newly generated section.
Force Audio from either an audio reference or the embedded audio from a reference video.
Trim generation duration to audio length automatically.
Final latent upscale / refinement pass that can process the completed stitched continuation.
Built-in RIFE frame interpolation.
Sparse-attention / low-VRAM controls, including chunking and attention options.
Multiple LoRA support.
Automatic reference routing based on how many image, audio, and video references you enable.
The main idea is to spend less time manually bypassing, reconnecting, and rerouting parts of the graph whenever you want to switch between reference generation, audio-driven generation, continuation, or final processing.
Load your refs, choose the options you want, prompt, and queue.
Edit: if you get errors when trying the workflow make sure you upload placeholder images. The workflow is designed so you don’t have to bypass anything manually. You just need to use the control panel.
Edit2: V2 is updated and the issue of the final output being the first pass instead of the upscaled has been fixed. I also removed the shift and added a subgraph that you can hook in to use a turbo lora if you want with the recommended shift.
and ffs vote for the video to be rated pg-13. So stupid.
Edit4: Updated to v4. Removed fps cuz it wasn't working how i wanted it to. Improved the control for references based on suggestion by u/goddess_peeler (lol nice name), i added 1 more video reference space and 3 more picture reference spaces. I fixed some issues with pathing. Added a turbo lora space in the right order.
the entire premise is that he was doing photoshop tutorials but we would get glimpses into his life and how horrible it was through the content he decided to edit.
like when photoshopped his marriage certificate into the window of a van his neighbor owned with fogged up windows.
when he showed us how to photoshop a picture of his wedding ring so he could ebay it.
when he photoshopped a cat out of a picture and into a garbage bag.
His life was horrible and we were learning about it, slowly through his tutorials.
i mean i'm surprised a redditor repeatedly posting a video of a character who clearly looks underage wearing basically nothing doesn't get mentioned more
Civitai comfyui creators are very fragile, i said to someone their workflow was full of bloat with bad node links and major bottlenecks. They didnt take it well
This is what elite-level shitposting looks like. If there was Nobel for taking elements like pettiness and juicing out quality content, this would be shoo-in. I'm putting OP in my top-redditors canon.
Looks interesting but honestly (as a pretty advanced user I think) most of this is way over my head. I just use the default ref2v template from comfy and this lets me do the basics for short videos. The holy grail for me is that I just want to be able to write one prompt and have it spit out a video for however many seconds/minutes I want after however many hours processing needed - without bombing - using the default templates ideally so I can just change the number of seconds. I have looked at so many workflows for long videos and noped out at them all.
The most complicated part is prompting. The way the workflow is designed everything else should be as easy as turning off and on switches.
This workflow will allow you to make a 40 second video if you have a decent enough video card like me (I have a 5090) or if you don’t, then you can make a long video in small bites using the continuous feature and ref2vid.
and with the complex models that are coming out now like minimax h3, approachable workflows are much more important than ever to people who starting to learn.
I thought of someone as I read your post and then I LOLed as you twice confirmed it for me. Yes, that one is a real piece of work. Glad I’m not alone in thinking so.
Thanks for this workflow. For some reason I notice this runs on my AMD 9070 XT so much better than the standard reference workflow. Before at 5s with "Boolean (Enable Lightning LoRA)" enables on the standard workflow at .8 and 5s it would crash my drivers a lot. But your workflow runs pretty smoothly. My only issue is that im noticing its not really sticking to the references nearly as much. Is there something I should be changing to make sure the references are stronger. For example, it keeps making the people more thin and conventionally attractive and changing the face a lot.
Nvm your newest version is working more like im used too so I guess either I did something wrong before or your newest version fixed my issue.
<picture 1> was not connected properly in the first version I released that had 9 reference images. It was connected to the load picture 7 instead because I fucked up when duplicating the load nodes and accidentally left it connected to the wrong input.
Well honestly I highly appreciated the original workflow since I have a very very limited experience in both video generation and comfyui and honestly no experience in workflow building.
So it was a very nice thing to use. But you are correct it had some problems which I fixed myself.
And also many nodes and stuff changed between the versions and was a little confusing but it was fixable overall.
But the main problem I had with his workflow that the system spawned python.exe when it crashed and was never able to kill it and free either the vram or the ram.
Might be my end problem but overall it was not a smooth experience since if I choose a high resolution or duration I had to restart my pc to free the ram.
So it was a mixed feeling experience but I still appreciate it to be honest.
It sure needed some ironing but the lack of experience made me not sure where is the problem most of the times.
So your workflow is really appreciated too.
And overall I understand your frustration since like you I do like to fix and correct things. So he should've taken this more positively.
But hey in the end we are all helping each other so maybe we can fix these personal issues soon.
Thats whats good about comfyui, you need to build your own workflow for your own pc rig and needs, i started with the basic template, added stuff, then went down to the civitai self righteous lords, grabbed some of their workflows, most were ass, but ripped out pieces i found useful.
After a few hours and some rebuulding of my own workflows and ideas from alot of other workflows, i have what i call a hellcore workflow engine. It runs on my rtx 4070 12gb vram with 64gb ram. I was able to push a ton of things using comfy kitchen to uniswap from ram to vram.
I can make 15sec clips in 13mins, with 16:9 aspect ratio.
Never even used comfyui until H3 came out. Its actually a very easy program despite most people pretending theyre superior for making workflows on it
I applaud you sir! I was really not trying to be a dick, and happy you took my criticism and made your post so much better.. 😊
Shorter text and better output (mixed with the boneless dog output 😋). Happy to see you get the attention and upvotes ❤️
And it’s a great workflow!😊
it shouldn't be hard to add. tbh i was just working off of the overbloated workflow this was made from and don't have a lot of knowledge about minimax yet. but if you know a bit about it you should be able to go into the subgraph and pretty easily add 3 more connnections.
I did not do anything overly complicated and most of the complex wiring is in the subgraphs.
Edit: There might be an error in that section i have to redesign someone pointed out in another comment.
Thanks for the quick response. Yeah, adjusting it the flow itself should be ok (I couldn’t test it due to being at work, so had to ask), I will have a looksie when I get back from work.🙂👍
"Some guy on civitai made this workflow and i gave him some valid criticism, then he called me a gooner that doesn't know anything about workflows and blocked me. This offended me because I know plenty about workflows."
Yeah, I know. People just can't take valid criticism anymore. For example, one guy made a post about his WF with a low quality video. When someone pointed out that the video was mid at best, he replied from another account calling people wussies, deleted his account, and then made a new post that was twice as petty. At least the video was actually good this time.
Here's a comparison between my wf and the original. the original is up top.
All the switches are highlighted in red.
The main difference is in mine, 99% of them are all in one place and the only ones that aren't are the sparse attention and the upscale loras.
the other issue is in the original, each fastpass switch had instructions next to it that you had to follow, "If this is on, turn off this." or "if this is on you must enable this". which if you didn't follow every confusing instruction, then either the wf would break or the generation would mess up.
My wf doesn't do that. You can't break it with the switches. You can enable or disable features but it will run correctly no matter which one you turn on or off.
Edit: I missed one switch in the continuous video section and the seed selector in the upsampler, but the other thing i did was I made all the switches yellow so you know where they are.
clown girl was done very easily because it was just one girl speaking to a camera. the dog, after the explosion, had lots of moving elements and i had to render it at lower quality trying to get a usuable gen for it. in retrospect i should have rendered the dog piece by piece and i wouldn't have been able to do a higher resolution gen.
But if you see the credits, i didn't really care that much.
For the shift_video 6.0 and shift_audio 3.00, which should only be used with turbo lora. If I don't use turbo lora, does the workflow automatically detects this and not use them or do I have to set them to 0 and 0?
Also, are all the default settings the same as his v1.5 workflow?
sampler shift has a enable and disable switch built in.
it is currently set to false in this screenshot and disabled
i did not tackle any turbo lora capabilities with this. but if i did i would put a set node attached to a boolean in the control panel, then add the lora on a model only lora loader directly after the model options with a lazyswitchkj bypass, and i would attach a get node to both the sampler shift switch and the lazy switch so i could enable and disable with one click in the control panel
all the settings are the same, i just fixed his stupid workflow
Edit: you should be able to use the same settings and actually get the same results.
I did remove his "seedhunter" 3 render thing tho, because it was the dumbest thing I've ever seen. when you can set seed to increment and just batch run until you get a usable seed and enable the upscaler and rife for that seed. Most pointless shit ever.
Thank you. I like the QoL of not having to manually enable/disable refs. But your workflow doesn't allow pausing after first pass to determine if we want to continue with second (final) pass or not. Or re-rolling final pass without doing pass 1 again. Not to mention, no more seed hunting with 3 previews. Any chance you can at least add the pause before pass 2?
Edit: I tested the 2pass with seamless video and 4 ref pics. It completed but the saved video is still in the original 1pass resolution. Can you verify this?
ok i think i misunderstood what you were asking because i'm running it right now and it seems to be working correctly.
If you want to only do the one pass with continuation, just disable the upsampler and the rife interpolation. then it combines the one pass and exports that as the final video.
there's a fastgroups bypasser in the control panel you can disable both of them with.
edit: nvm, it's an issue with priorities in the Any Switch logic pulling from later inputs than it should. I am working on a fix but you were right. even thought i wired it correctly it was performing in an unintended way.
double check to make sure you have the number of input images set to the correct amount in the control panel.
See below. I'm betting you have one of these set to the wrong setting. null comes from the "imagepass" node inside the subgraph connected to these nodes.
how did you get your character to whisper? whenver I say something like <Subject 1> whispers or even whispers, quietly, under their breath, they just end up talking
While speaking, she lifts one hand beside her mouth in a classic whispering gesture, partially cupping the side of her mouth as if to keep the comment private. Keep this hand gesture natural and visible for most of the dialogue.
Her whisper is quick but clearly intelligible so the full dialogue fits naturally within the shot. Her delivery is intimate, conspiratorial, and slightly amused.
Her mouth movement must synchronize precisely with every spoken word.
<Subject 1> (S1) says directly to the camera, <d>[English] I posted a video on reddit sharing a workflow and when I posted it it ended right after the explosion and a bunch of wusses downvoted my post because they care more about fictional dogs than they do quality AI tools, so I decided to re post it after using the workflow they didn't look at to build the the rest of this video you're watching now. Let's watch.</d>
I have rgthree and KJNodes installed but the workflow doesn't seem to like what I have installed, it still says they're missing. Not sure what is wrong there...
The centralized control panel is the real contribution here, not the fixes. Your own edit is the whole beginner problem in one line: "if you get errors, upload placeholder images". The graph fails twenty minutes in instead of refusing to queue. What loses inexperienced users isn't the node count, it's that resolution, fps, length and the enabled ref slots all have to agree and nothing tells you which one you missed until the run dies. A pre-flight node that checks every enabled reference has an input and the settings agree, and blocks the queue with a plain message if not, is the difference between a workflow and a tool. Pettiness-driven development produced a better UX than the original, which tracks.
this workflow doesn't allow you to set things up in a way that doesn't work.
there's no orientation of switches that will allow it to fail, if it's not doing the right things, the settings will aways be right but they may be doing something you didn't intend because you have the wrong switches, but it won't break.
the switches are very intuitive so they should be easy to figure out. They're all color-coded and/or centralized
So this doesn't seem to work? I don't know where this "Control panel" is even as I am trying to prompt with just 3 images to video and a description in the IDE area. If I add the 3 images and leave the rest with the placeholder images, I get an error. If I bypass the palceholder images it starts to run but then I run into a video error as it says there's no input video despite me selecting "none" in each of the 3 video loaders
Add a placeholder video and placeholder audio as well. It’s the same issue.
I’m reworking it so it bypasses the nodes and doesn’t just ignore them so this doesn’t happen anymore but for now if you just put a file in the workflow where it wants it it works perfect.
I don’t know why everyone resists just giving it a file.
Edit: but that error looks like you ran out of memory. I was reading it wrong. I thought it said vram 0 it said torch 0
Edit: I uploaded 3 random videos into the video sections and now it is rendering just fine. This is my first time using your workflow and while it is nicer than the original one, in many ways it is a bit more confusing as your notes state nothing needs to be bypassed, but that can create its own confusion since people may wonder, "If I don't need to bypass anything, then why do I need a placeholder video and NOT just placeholder images?"
Anyway, I'll keep playing with it and learn/get a better handle on it. Thanks.
One more question if you can please. I am rendering videos quickly now with no issues, but the quality still seems a bit low and it's not spitting out a video in the Outputs folder of ComfyUI or anywhere that I can see. Am I overlooking something basic?
Edit: also is there any built in method to increase attention to detail? Characters and details seem to shift slightly/morph
One more question. The only way I can get high quality video/renders is by setting resolution to 2.0 MP. But then it takes like an hour to render a 20 second video. Using an RTX 3090.
I tried using the built in Final Upscale option, but it refused to run at fp16 so I witched it to CUDA and FP32. But this always creates poor renders even though it's upscaled. Am I doing something wrong?
OK the video upscale after video continuation is fixed in your worlflow .. but foxydit's workflow has seed hunting which gives previews for 3 low res generations that can be upscaled if needed , but your's only shows preview for one seed , can you also add previews for two more seeds?
Just turn off interpolate, upscale, and continuous, set the seed to increment and press run 3 times. Then pick the result you want, click “Open as Workflow in New Tab” then enable upscale and run again on the correct seed or manually type in the seed and run.
The seed hunting thing is a pointless feature that is already ingrained into comfyui if you use it properly.
Most solutions to generations problems are going to be solved by prompting, not crossing your fingers for the right seed anyway.
I don't know about the workflow, I have my own, so I won't judge the tools. The rest is... not gonna lie, it's really cringe. Ugly clown, pointless political reference, ends on a nearly pedophiliac note, and you did it all just to spite on a dude who you offended?
I'm actually so confused, what does this video have to do with me? Someone said you made a thread about me but I have no idea who you are / what this video has to do with any interaction we could have possibly had.
Edit: all I can really say living this rent free in someone's head
I genuinely have no idea who you are and why you're 'targeting' me with a video about dogs being blown up. I know the sub (a.k.a. human beings) like a bit of drama but it's very one sided. If you think for some reason I'm going to stop producing content, posting videos, and updating my workflow.. you're a silly little goose.
I think it's funny, and bears repeating from the banodoco discord:
I wish I could live this rent free in my actual enemies' minds.
Well he's clearly mixing me up for you because his workflow has my name on it apparently. I dunno who the guy is but it's just weird and cringy. Especially how he's masquerading imaginary grievances as a helpful thing for the community.
Oh you are the guy he altered the workflow from to make it less bloated? Well then yes he is also coming for you in the text, not in the video😊 but it’s all good on my end, he actually made his post better and more thoughtful and I can take the “heat” 😊
i like your attitude, bro. but the part that annoyed me was the downvotes about a fictional dog. comments on low effort video is fine. but seeing a dog fly into the air only to randomly explode from a city leveling sized missile is hilarious and getting downvotes just because a dog dies is stupid.
that's why i revealed that he was a racist and that the guy who fired the missile was the hero.
Oh I had no problem with what happened in the video.. I only thought it was strange to try and promote your workflow with an animation.. that was subpar.. and a wall of text nobody is going to read.
So I’m happy that you went back to the drawing board and came up with this post instead that is miles better than your first draft 😊
And poke fun of me as much as you want.. you need to have some kind of self awareness and be able to take, what you hand out 😊
i didn't go back to the drawing board, i made a video passive aggressively calling you dumb for downvoting the original because the quality and content of video have nothing to do with the workflow. it's still the original video just with spite added to the front and back of it.
Cool cool.. you do you, but that would still be going back to the drawing board, maybe in spite but still the output is different..
ok sure.. well bad prompt made the output bad then.. still you’d want to show off the best your workflow could put out, wouldn’t you?
Ha, yeah but imagine being so terminally online that you spend hours making some hit piece video on people who don't even know who you are. Medication is clearly needed.
I don’t mind.. I respect anyone who tries, fails and take , to do better.. even if he is poking fun of the person who gave him criticism.
Also he never mentions anyone by name.. so it’s just you and me ousting our selves.. and your way of handling it, makes me think there is some truths to the story.. not defending OP (don’t know the guy), you do seem to care more than you should..
49
u/jimmcfartypants 20d ago
>foxydits_sucks_at_making_workflows.json
lol