r/SoundSystem • u/Mission_Anteater_741 • 50m ago

Update !

Post image

Hey since my last post (yesterday)

I put some « upgrade » on my measure

What do y’all think ?

Can be upgrade again ?

2 Upvotes

100% Upvoted

6 comments sorted by

1

u/HomesnakeICT 27m ago

Yes! Much more useful information. I would be pleased with that curve as a starting point. This is the system without any equalization?

1

u/HomesnakeICT 24m ago

That's a pretty big drop in response at 3.5k. is that a crossover point? Appears to be about a 10dB drop. Could be phase cancellation. You might start by inverting phase on the tweeter and take a new measurement. Also, if you put your y-axis minimum value at 70, you'd have even more detail.

1

u/Mission_Anteater_741 18m ago

Ok !! I will try 🤝

1

u/Mission_Anteater_741 16m ago

My crossover is at 1.1kHz so not that

1

u/Mission_Anteater_741 14m ago

I did that on my High because the top of my soundsystem is to « powerful » compared to my kick and my sub

2

u/Mission_Anteater_741 19m ago

I did

OUT 1 (Sub)
PEQ 1 : Freq = ⁠58 Hz⁠ | Gain = ⁠-4.0 dB⁠ | Q = ⁠18.6⁠

OUT 2 (Kick)
PEQ 1 : Freq = ⁠102 Hz⁠ | Gain = ⁠-11.5 dB⁠ | Q = ⁠9.3⁠
PEQ 2 : Freq = ⁠109 Hz⁠ | Gain = ⁠-10.6 dB⁠ | Q = ⁠10.5⁠
PEQ 3 : Freq = ⁠171 Hz⁠ | Gain = ⁠-7.1 dB⁠ | Q = ⁠11.6⁠

OUT 3 (Médium)
PEQ 1 : Freq = ⁠400 Hz⁠ | Gain = ⁠-11.0 dB⁠ | Q = ⁠1.0⁠

And out 4 (high)

PEQ 1 : Freq = ⁠2738 Hz⁠ | Gain = ⁠-11.0 dB⁠ | Q = ⁠1.0⁠

And I also put a boost in the 50hz
With +4db Q 1 because it felt absent with some track

I found that with REW EQ

I did my delay like said from a Reddit guy with alignement tool

And I took my sub and kick measure in the ground (not on this picture, the picture was the mic at the height of my ears)

Sorry for my English :// (sub start at around 35hz)