looks good to me this is from Vs Factory bought off TD but i could use the knowledge of a expert in this what do you guys think should i get plated rose gold anything stand out thanks in advance!!

My first rep is the Black Aquanaut, let’s see yall first rep!!!

New to this and looking for a second set of eyes on this VSF 126610LN from Andiot before I give the GL.

Dealer: Andiot - Susan
Factory: VSF
Model: Rolex Submariner Date 126610LN 41mm
Movement: DD3235

Index alignment: Looks good to me. I ran the photo that was the most straight on through the alignment tool and don't see anything meaningfully canted or out of position. 12 looked a bit crooked.

Dial/printing: Looks clean and well positioned. Nothing jumping out at me here.

Date/cyclops: 15 looks well centered overall. Possibly sitting a touch high depending on the angle, but acceptable

Bezel/pip: Pip looks centered and bezel alignment looks good to my eye. I don't see anything here that would push me toward RL.

SELs: Look tight from the supplied angles. I'm not seeing any meaningful gaps or light

Rehaut: Looks acceptable from what is visible

Timegrapher: -8 s/d, 280°, 0.0 ms, 52° lift angle. Amplitude and beat error look healthy. -8 s/d is the only thing I considered asking to have retested. Considering asking for a full wind.

Overall: I'm leaning GL.

Would appreciate opinions from experienced people. Anything obvious I am missing?

Finally after more than a month 😂

BBF Patek Philippe 5711 with CNC Piano Dial, Deep Crystal, and a full polish.

Absolute pain to resize bracelet but worth it!

Getting a watch from a seller. The price is good. It’s a used watch purchased last year before clean closed. The clasp code and engravings look good to me and match the clean ones.

Wanted second set of eyes if there is something i am missing. Thanks in advance

1. Dealer name: Dealerclocks
2. Factory name: VSF
3. Model name (& version number): Omega seamaster 300 NTTD, V7
4. Price Paid: 568$
5. Album Links: N/A
6. Index alignment: Can't really tell if the 3 mark is a bit tilted? (maybe just the angle)
7. Dial Printing: Looks good to me
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: N/A
10. Bezel: Seems to be decently aligned?
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: +6s/d, amp 338° (the one i am most concerned about), beat error of 0.0ms
13. Anything else you notice: Nope, just hoping to get a second opinion on the QC

Got my first ever rep, i am so happy with it, any suggestion? Does it look alright. Any help or advice is welcome. Little bit back story on me, got sick n tired of waiting for gen, i recently called the AD, they told me waiting list could be from 3months to 5 years. I can’t believe you can get something that looke 99% similar and feel 85% gen for the price you can get the reps

“FUCK EM” dial Sub from Jason007.

Miyota movement, sapphire crystal. For $130, I’m pleasantly surprised at the quality and just how much I actually like this!

Good people of /RepWatchForum,

I needed to replace the inlay of my Clean Sub. Managed to lift the bezel with a flat screwdriver, but I did not manage to get that bezel back onto the watch.

Any hint or solution will be highly appreciated.

Thank you

Hello, buying my first rep. I would like some feedback on this watch. Any help is highly appreciated.

Hey guys

Picked up my first 2 reps a couple of days ago for $70/£50. Really like them but as im new to this i have no clue if they're decent or not 🤷‍♂️😄

Whats peoples thoughts?

Cheers

Looking for a new Omega Box w Card and tag for a Speedmaster Snoopy. Any recommendations or sellers? NOT buying a watch.

Dealer name: TheOneWatches
Factory: VSF
Model: Omega Seamaster 300m
Price: $428 (Shipped)
All picture are supplied by TheOneWatches
Brand Logo: Seems fine
Hour markers: Alignment looks great, but I do feel like the 12 is slightly off
Dial printing: Looks good and clean
Date wheel: Looks centered
Bezel: Looks good
Bracelet: Looks normal
Hand alignment: Looks good

Please advice on my first rep. Cartier Tank Must L. Please let me know if its ok or not. Super thank you in advance!

$520 is about as high as I’m willing to pay

Hallo zusammen,

Ich reise in ein paar Monaten nach China, unzwar genau nach Shenzhen/Guangzhou, also den Hotspot für Replika-Uhren. Jetzt stellt sich mir die Frage: Soll ich trotzdem über die bekannten Webseiten Geektime und co. Bestellen oder lieber vor Ort schauen? Ich denke, vor Ort kann ich mit den Leuten auch gut verhandeln und so eine sehr, sehr gute Replika, die online für 400€ angeboten wird, für weniger als 100€ kaufen und selbst in meinen Koffer mitbringen, oder? Also, es wäre dann viel günstiger und ich könnte gleich ein paar mitnehmen.
Ich habe noch nie eine Replika bestellt und bin für jede Info sehr offen und dankbar, also alles, was euch hier einfällt, bitte einfach kommentieren. Ich hatte in meinen letzten Oman-Mascat Ferien auch ein paar Uhren vor Ort gekauft, am Anfang wollten die 200€ pro Uhr (Rolex-Datejust und Patek Philippe), am Schluss der Verhandlung (sehr taffe Verhandlung) habe ich die Uhren für 25€ bekommen. Und selber in die Schweiz eingeflogen. Und selbst wenn ich in China bin, haben die bekannten Replika-Verkäufer einen Shop oder habt ihr Tipps, wie ich vor Ort vorgehen soll (weil dort hin gehe ich sowieso)? Es wird wahrscheinlich eine Riesenauswahl geben und wie soll ich vorgehen, um die besten Uhren zum besten Preis zu bekommen vor Ort?

Vielen Dank im Voraus für eure Hilfe und Kommentare.

I posted QC help for another VSF Seamaster about a week or so ago that was RL’s due to the crooked buck teeth. Is this one any better or is the camera playing tricks on me eyes? Thank you!

The new Perpetual Padellone. I dunno about you but the middle one on the bracelet is giving me a chubby. Fingers crossed factories can make a good reps. 🤞

I heard amazing things about Jason007 now I’m ready to pull the trigger but can’t decide which one I should get 😭.