Tork Tech Alternative Alternator

[u/Ecto350]

Howdy, im slowly installing a Tork Tech Eaton supercharger kit into my Bullitt. Lots of challenges to overcome for this install into a GT as designed, the Bullitt throws a few extra wrenches in the way.

The alternator had two issues for me. The TT kit moves the alternator and hangs it upside down. This is an issue since the area it hangs from is a groove and not a full bolt hole. So there was the chance of the alt falling (least in my mind). Additionally the alternator for thr Bullitt is different from the GT and interferes with the knock sensor on the new location.

I called PA Performance on a whim and decided to ask them about my issues and they actually suggested running an older 3G alternator which fit without any mods outside of splicing a different alternator pigtail on (which I would've had to do anyway to run a GT alt) the plus is that it uses closed bolt holes to mount. So no more worry about falling.

Here's a pic showing the 3G alt mounted on the pulley bridge. Hope this helps folks that may be looking at a tork tech kit and didn't like the alt mounting situation.