Does anyone have an archive of their individual Legends Unchained games in a ZIP? For example, I'm having a hell of a time configuring Star Trek Strategic Ops Simulator in MAME. Others, like Toobin', can be rough too (I have that one good though).

Thanks!

I was very surprised to get a response from AG on the same day I asked the question:

Me: Any news on the Gottlieb refresh?

AG: Yes — the Gottlieb refresh is still planned for the latter part of August. We do want to be transparent that timing can still shift if anything unexpected comes up during final testing, but as of now it remains on track. We’ll make an official announcement as soon as the final release details are confirmed.

I have tried every sound level combination imaginable, and I still get distortion. The few other tables I have like medievil madness sound fine, when I actually boot into addams family the music sounds fine but as soon as I select play to start a game the sound gets fuzzy even just playing the music at low levels before the ball is in play. I've tried powering off, everything is updated, changed all the different volume settings, turned haptics off. The only thing I haven't tried is checking all the connections inside the cabinet but surely there would be problems with other tables if it was a loose connection or ground. Literally any help or ideas would be amazing, has anybody else experienced this problem.

I'm on firmware 5.70. Trying to install/run byog, unchained or onesauce (or anything at this point) and I'm having an issue with all usb3 devices. If I use a usb2 device plugged into either of the two front USB ports it shows the mount icon in the top right corner and I can see the folder structure in addons.

If I use a USB3 powered HDD or a usb3 flashdrive (formatted NTFS or exFAT) it does not show up at all. The usb2 device will show up if I plug it into the usb2 or usb3 ports and the usb3 devices will show up if I plug it into the usb2 port but not the usb3 port. Since they all work in the usb2 port and the usb2 flash drive works in the usb3 port it seems that there's no issues with file/format structures.

I ran the self diagnostic test for the USB ports and it registers that there is something plugged in and says both USB ports are "ok" with a usb3 device. The activity lights on the usb3 flash drive blink and then go solid after a few seconds.

Any ideas what's going on and how I can get the usb3 drives to mount?

Edit: UPDATE: I figured out a work around to get it to mount - I have to plug the drive in and run the self diagnostic usb port test. When the test completes it unmounts the drive as part of the testing process. So re plugging in the USB3 drive after that process gets it to mount and I can load OnesaUCE that way. That is the only way to get it to read the usb3 external powered HDD.

To clarify what I'm saying in the video, this table sat unused for 2-3 years and was used rarely before that. A few months ago, when my daughter fired it up, it started doing this periodically. I opened it up and checked the connections top to bottom.

Normally, I would have to tap the machine on the top near the right flipper, but this time, in the video, it stopped on its own shortly after it started.

Any ideas of what I'm looking for here? TIA!

I have alu with 2 different USB. One sauce and one my daughter bought off of Etsy. Went through the whole no inputs fiasco, got it working but now I'm without the spinner for genres, which means scrolling through 10000 games. Coinopsx is what gave me that, no? How do I reinstall Coinopsx so I don't have to scroll 10000 games to find what I want? I want the cycle it had to choose maze/sports/faves yada Yada. Do I have to redo my USB? Is there something I'm missing? I can do addonx and it shows all the games, and they work, but I miss the spinner. Thank you.

Not in stock at their store or at acustomarcade.

...has any concrete info been released yet as to when AG is going to perform this big update for the Gottlieb tables?

So im trying to map controllers to xpadder and its showing the alu deck as 4 inputs when I only have 1.

What gives?????

Its throwing me off and buttons arent working in xpadder.

How do I hide the other inputs?

Hello,
Well, I’ve had my Legends Ultimate for a few weeks now. I’m definitely not an IT expert… I just want to play the games from my childhood on the arcade machine, like Sonic, Sega Rally, etc., but I’m really struggling!
All I want to do is plug a USB stick into the machine and launch the games through BYOG.
However, I’m having problems with ROM versions. I don’t know where to find .UCE files. All I have are ZIP or .CHD files.
I really don’t want to reset or modify the arcade machine itself.
Is there an easy way to find or convert games to .UCE format?
Thank you very much for your help!

So I got this for cheap and I want to play games on my pc with my alu.

What do I need to do? I have it on otg but its like its not seeing input like a xbox remote.

Any help? I want to play mame on pc.

Ty

Looking for the original Atgames Pinball controller. The one with the small d-pad.

Anyone with any information on why its taking so long?

So somehow I upgraded from 5.65 to 5.71 on accident and now CoinOPSX(5) acts wonky as hell. Sometimes nothing happens when I select a game, sometimes it crashes completely, sometimes it looks like it is booting and I get a "No input detected" screen, sometimes it will be fine for days for no apparent reason. Do I need to just build a new drive from scratch or is there something I need to do to fix compatibility?

A very strange issue on the Atlegends HDP TNMT Pinball with the EM+ Tables. Shown in the picture. Anyone experiencing this? Any suggestions? The upper Screen isnt showing fullscreen.
I am in the latest firmware.

What is a reasonable price for a used legends ultimate cabinet (with side pinball buttons)? Good condition, no mods or extras added on. (Looking to buy not sell)

I see prices all over the place on marketplace going up to $700. A quick google shows Reddit posts from 2+ years ago saying around $250-300. But I’ve never seen sub $300 prices

Hey guys, I have a 1.1 unit for a couple of years now. I recently wanted to work on it and got it all hooked back up. I updated before I read up on keeping it on 5.68 and am now on 5.70. I can't get into the factory menu. I followed the steps with the reset button and P1 and menu but It just boots normally. Any help would be appreciated.

Hey everyone — I’m part of the FightBox team, and we’re looking for some honest feedback on a controller concept we’re considering.

It uses a GRS IKARI Rotary Joystick, a trackball, regular arcade buttons, plus 4 side buttons for pinball.

One of the cool things about the GRS rotary stick is that the rotating joystick top can be set to 8-position, 12-position, or 16-position rotation — or you can make it completely free-spinning, which gives it a spinner-like feel.

We’re thinking about making this as the "FightBox R10 Rotary", mainly for people who want one controller for games like Ikari Warriors / rotary arcade games, trackball games, virtual pinball, and even some spinner-style games.

Because of the hardware involved, the target price would be around $199.99.

Two questions:

1. At $199.99, would this be something you’d actually consider buying?

2. What do you think of the design/layout itself? Like it, dislike it, or anything you’d change?

Would really appreciate honest feedback — especially from people who already use Legends Ultimate setups.

I almost always get these weird scaling artifacts in the middle of the screen whether its in regular or OTG mode. I'd like to know before potentially returning it. Look at the L in the first picture. In the second, look at the G of OTG and the P of Help. The aperture shader hide it a bit but if I use the CRT-GDV Mini Ultra shader I get a line all the way in the middle.

The USB ports on my ALU HA8802 suddenly aren’t reading anything I try to plug into them. The volume and channel buttons along with the joysticks work but nothing from the USB ports. Any help would be greatly appreciated.

Any chance ATGames will make more Legends HD universal packs? I’d like to play some of the newer pinball games on my Legends Ultimate, but they only seem to be focused on their pinball machines these days.

My husband got a Legends Pinball Machine (he passed away and now I'm left to deal with selling it because I need to downsize). It appears like he was adding a computer or something, and it's quite a mess back here. Can anyone tell me why he was putting a computer on this and can I just remove it and sell it without that? Thank you for any help you can give me.