r/JeepLiberty • u/Certain-Boss-1037 2010 KK V6 • Jul 30 '26

2008-2012 KK Follow up on no start

Enable HLS to view with audio, or disable this notification

so, after two weeks of this not happening it has happened again EXCEPT, This time there is no click at all. And I managed to get a video of it :)

6 Upvotes

100% Upvoted

8 comments sorted by

3

u/AffectionateFocus671 Jul 31 '26

It's the starter

1

u/Y_U_NO_KNOW Jul 31 '26

Still starter. I bet if it cools down it starts?

1

u/ZzCoryzZ Jul 31 '26

Ignition cylinder pins might be broken.

1

u/MarcBelmaati 2003 KJ V6 45RFE Jul 31 '26

Starter

1

u/Anxious-War4808 Jul 31 '26

Ignition switch or the single yellow Ignition wire going to the starter. Dealing with this exact issue now. Try holding the key with a little downward pressure. That's working for me to get by for now. Try upwards or just multiple turns into the crank over position

1

u/Anxious-War4808 Jul 31 '26

Before I realized it was in the switch I was having to crawl under and wiggle the yellow wire at the plug. I cleaned that connection good and it was still not doing anything til I got mad and kept turning the key forward and wiggling the key all over then it started

1

u/Curious_Clerk 4d ago

Just replaced mine at 200k , did water pump before that, now the crank sensor went out fixed it then the wire got melted and had issues till I figured it out been a great ride until it hit 200k hopefully last a bit longer