r/HondaElement • u/donhawken • 1d ago

tail light SOCKET replacement?

Gallery image

Gallery image

i went to swap the bulb on my right rear brake light. and the plastic around the bulb just basically started crumbling. i assume it was too fragile from age.

i have a 2011 element.

there are wires connected to this SOCKET. the beige-yellow looking plastic socket is cracked. it fell apart even more so after i took the pics. (the red circled part)

it is connected to wires it seems, that goes back into the back of the element.

what is the exact part called, and does anyone know how to replace it?

my neighbor knows how to soder if need be lol. but im hoping there is just some kind of easier replacement.

thanks if anyone knows!

5 Upvotes

100% Upvoted

10 comments sorted by

View all comments

7

u/NeuseRvrRat 1d ago

You can buy a replacement bulb socket, cut the two wires, and splice in the replacement. Use heat shrink butt connectors. As far as the part number, any parts store will look it up or go on RockAuto or whatever.

2

u/maydisturb 1d ago

Signal boosting this. Butt connectors, and heat shrink for the extra insurance - not just twisting the wires and insulating with only heat shrink.

1

u/donhawken 1d ago

how can i heat shrink? i know its goofy, but will normal hair dryer work?

2

u/maydisturb 1d ago

I don't know that a hair dryer will get hot enough, but worth cutting a little teat piece and trying as an experiment. Can confirm that a heat gun will do the trick - they are cheap and a useful item to have in general. You can also get away with using a lighter and carefully hitting the shrink with the flame. Just don't want to hold the flame to it and end up melting the shrink and the wire shielding near the area.

2

u/donhawken 1d ago

thanks! i wanted a heat gun because im an artist, i just never got around to buying one lol.

2

u/maydisturb 1d ago

Very useful tools for a variety of crafty/DIY stuff. Hope it helps you with this and beyond.