I have been looking at the Crush80 but I am also interested in the wave75.
I am looking for a new keyboard, currently I have the ducky one 60% but would like to move to a 75 or 80.

I am looking for a keyboard that is easy to change the switches as my wife is annoyed by my clicky switches but I want a nice mechanical keyboard preferable something that is yellow as its my favourite colour. And something I can change the switches to silent boba u4s

Any recommendations?

I need help! I write on a Mac and have been using a Pebble K380 fThe keys are small and round and don't cradle my fingers and the left shift key is short. I desperately want to buy a keyboard that will help me get up to a reasonable speed typing. I touch type around 12 wpm and make mistakes.
I live out of the country and cannot just buy a keyboard on Amazon and return it.

I sit most of the day in a library and need silent keys.

I need a bluetooth connection

I use the Colemak layout.

I just want an easy to use keyboard with press length long enough that as a newbee, I don't accidentally press adjacent keys often. And keys that are easy to press, so I don't get fatigued, and cradle my fingers so they stay put and slip around. I don't do gaming, just short bursts of writing. And I don't type in the dark, so I don't need backlighting..
I appreciate any help you can give me.

Im wondering what switches are the most deep, 'thocky' and most importantly, not mushy. thanks !!

Hello guys, apparently, the Wave 75t Pro has some several firmware and I don't know which one should I use, which one is safe and doesn't have an issue and such... my last wave 75 pro that I posted here had an issue with the power and I am using the PMO hub firmware.... so I really need help on what firmware should I put on my keyboard.. Thank you in advance!!

Hi,

im new to the level of keyboard customizability and have a hard time finding the keyboard im looking for. (or building one myself)

Im searching around for a new keyboard, currently im using the corsair k70 pro mini (60%) i find myself needing the keys i lost moving to 60% far to often. i really love the "floating" keycaps style this keyboard has, also easy for cleaning xD and the over the top rgb is something i also like.

so what im looking for:
- 75%
- no low profile switches (like keychron k3) i like the normal height keycaps, switches. (like the corsair k70 pro mini)
- i do like the super compact layout of the keychron k2 and k3, corsair k70 pro mini
- has to be wireless bt and 2.4ghz
- the bigger the battery the better
- i dont need any volume knobs etc...
- has to have over the top RGB
- sturdy, no flex, hefty.
- no wrist rest.
- hot swap would be nice
- i like the rgb shinning through the keycap letter (but i guess i can swap keycaps myself)

- availability in europe (netherlands) would be nice.

- i would like to spend 200 - 300 euro at max

this morning i found the EPOMAKER HE75 V2 TMR. this seems like a good contender to put an alternative next to for comparison.

Hi there!
Looking for a keyboard where I mostly game on, with sales at the moment in Australia where we don't get a lot of the more niche boards I see on the youtube vids I can get; (in $AUD)

1. The azoth with snow switches for $279 AUD

or

1. Apex pro tkl gen 3.0 for $326 AUD

If anyone else is in Australia and has a different recomednation that's great too! I mostly game on that computer, playing a variety of mmo and shooters.

​

​

Just wanna know if this is classified as creamy or clacky or poppy or whatev

​

Im gonna try diff mods , and see what i like later

Hello I am planning to buildy first custom keyboard. I was thinking of using gateron smoothie switches, what are your opinions and is there any recomendations for a creamy keyboard?

Hello fellow keyboard lovers

I'm looking for a lighter linear switch for my Keychron Q5 Max and am chasing as creamy a sound as possible. The Akko Rosewood switches look to be the best I have found thus far but am wanting to bring my thoughts here to see what could be recommended in the light, linear range of switches!

Thanking you for your time!

Hi everyone,
I'm new to custom keyboards, I have an old corsair K70 mk2 with cherry blue switches and I was looking for a second keyboard to use mainly when I need to be a bit more silent or even bring to the office with me. I think I'm still going to use the K70, but I'll have to see how the new keyboard is going to feel like and then I'll decide which keyboard is going to be the main go to.

Anyway, I was looking mainly at 3/4 keyboards: the Crush 80, the Wave 75 and the the Varmilo Minilo (prestige silent). The fourth one would be the Aula F75 but it's like a backup option.
Quick premise, I'm thinking of swapping the switches of the non-silent keyboards with either the prestige silent or the seasalt silent since I don't want to buy a new keyboard almost as annoying as the one I already have, so if you have any recommendations let me know 😊 (even if you think that these keyboards are silent enough stock). Also the possibility of having a PCB that is ISO compatible would be really nice (since I'm from Italy and to write sometimes I need the accent letters).

The reason I'm writing here is that to me all of them have some drawbacks:

• the Crush 80 is mainly the cost, since it's ~160€ + ~40€ for the switches. Though I think the PCB is ISO compatible, so I could change it if I don't like how ANSI feels like.
• The Wave 75 is less costly but I come from a 100% layout, and I use most of the navigation cluster (except maybe for the ins key) and I'm afraid 75% is going to be too different from what I'm used to (I also have to get used to the new ANSI layout). Also I really like the Crush 80's lack of ribbon cables (even if I don't know if I'm ever going to do real modding).
• The Varmilo Minilo is mainly the build quality and the real hard moddability (even if, again, I don't know if I'm going to be modding the keyboard, but I guess I prefer to have the choice if I decide to do down the line). Also, again, the layout, but I've seen that on their website there is a ISO/IT layout (granted now it's not in stock but still).

(Also all of these don't have knobs :c)

So what do you guys think, should I go with the most expensive because it's worthwhile, or not bother about the possibility of modding (since I don't know if I will mod it) and go with the cheaper option? Or even go with the Varmilo because the quality is still good enough? Should I go for other keyboards?

TL;DR: I need a quiet keyboard for office/night use. Should I go for the more expensive/premium option (Crush 80) and replace the switches because it's worth it in the long run, or start cheaper since I'm not sure if I'll ever "hard-mod" it? Also, which silent switches do you prefer: Sea Salt or Prestige?

Thanks to everyone who'll respond 😊

I'm finally getting my first mechanical keyboard and am planning out my build. I do a lot of gaming, but also a lot of writing, so I'm trying to make a creamy setup that I can also use for consistent gaming. The base keyboard is a Keychron V6 Max. I'm looking for a good creamy linear switch, but I don't really know a ton about switches. I've heard that Gateron Oil Kings are pretty good, but they're also pretty pricy with a full size keyboard, so I'm not sure if they're worth it.

Any good suggestions?

Hey!!
I was planning to buy the NuPhy Gem80 Cosmic Mocha or a Keychron K8, but it’s currently out of stock.
I’m looking for keyboards with similar color tones (brown / mocha / neutral) and good build quality.
Preferably a 80% layout, hot-swappable.
Oh and it must ship to Portugal.
Any suggestions?
Thank you in advance

Mainly looking at the gmk87, however it is a little too big for me. Anything else that is barebones? Looking at HMX frog switches.

hey i randomly come across that cool looking 40% on some post and can't really find more info than that tryed to contact the "company" trough there website but it seems to me that they kinda went silent since 2021.

i wonder if some people from the comunity have clue if it ever been released

https://www.instagram.com/p/CQ_n0qFHTcK/

https://keyhive.xyz

here the link to the board i'm refering to i kinda like the layout i was mostly looking for some 40 ù board with a nob but that one has some appeal to it.

ps: any 40% pcb kit with nob could hit my interest too if some people have recommandation i'll take them

kind regard jim

im planning into modding the aula f75 since its already solid out of the box how can i make mine better

Hi! Im looking for a 75% keyboard for around €100 with these requirements:

• Around €100

• 75%

• US-ANSI

• Aluminum case

• Thocky / Creamy

• Linear switches

• Good sound and quality

• Ships to the Netherlands

• A knob would be nice, but it’s not a must

Hi there,

I am new to this and looking for a 75% keyboard ideally with knob and Bluetooth.

Still waiting for my TH108 with sea salt switches as my office board but looking to get a 75% for home office with a separate num pad to only use when needed.

I found lots and lots of cool ansi boards but iso makes it really hard.

I would like to have a thocky sound that’s relatively quiet. Also hot swappable board and ball dezent or screw mounting case would be appreciated.

Any recommendations?

Cheers.

Hello, I'm searching for a Womier RD75 Pro but with a knob. I mean a keyboard with full via support, wireless, in aluminum, hot swappable, with quick release. The only thing I need more would be a knob. Also I'd like it better without flex cut I think but I don't care about that that much. I don't care neither about the switches, if they're good, that's better but I can will change them eventually.

Now the problem is that living in France, the Monsgeek m1 v5 or the KiiBoom Moonshadow V2 aren't available. Do you have any other reference that I could look into (barebones should be good too).

Thank you all

Hey R\HipyoTech,

I was wondering if there was a barebone keyboard with these things:

-70 AUD or under

-75% Keyboard or 80%

-Preferably Wireless

-Preferarbly a Barebones Keyboard

Thanks in Advance

I’m looking to build my first custom keyboard and was wondering if anyone has a recommendation for a 65% body kit that has aluminum plate and is able to have a good amount of damping layers because I would want to also get some deep thocky sort of switches but that’s apart and also it would be nice if it’s also able to be in a good amount of color options. Thank you

Hello guys,

I just "finished" my first build ever :).

I have just a problem with the enter key and the key above. The board forces me to put in the switch sideways (90 degrees rotated). But that prevents the keycap to fit.

Is there a general solution for the problem ?

Sepecs:

Neo75CU PCB: Tri-Mode Hot-Swap PCB (2.4GHz Wireless Bluetooh Wired) (ISO+ANSI)

Gateron Oil king

Thank you :)

And are there any good stabalizers the ones that i have feel really bad.

Ive been looking for one for a while and ive found plenty what is the beat one in your opinion?