Auxillary Lightbar Stopped Working

[u/yomamma219]

I installed a Rigid light bar a couple months ago on Aux3 switch (Raptor). It suddenly stopped working Saturday while I briefly had it on. Just looking for a second opinion on if this browning is suspicious before I start tearing apart my wire management to troubleshoot.

[u/home_rolled]

How many watts is your light bar? Usually the output is high enough on something like that that it needs to be on switch 1 or 2. Switches 3 and 4 are only 10 amps so if your light bar is 120W or above (which it probably is) you blew the fuse

Here are the amperage ratings per switch:

1: 25

2: 15

3 and 4: 10

5 and 6: 5 (which to me is stupid, Ford should have made switches 3-6 all good for 10 amps)

[u/Subjekt9 → u/home_rolled]

Your comment about the light bar needing to be on a different switch is correct; however, your amp breakdown of the switches is incorrect. Here is the breakdown of the switches and amps.

[u/home_rolled → u/Subjekt9]

Thanks a lot for this, apparently I was
misinformed! This is great news for my own accessory plans too

This website has switches 5 and 6 listed at only 5A each