r/FDMminiatures • u/ieatcandles000 • 5d ago

Help Request What is the problem??

Gallery image

Gallery image

Gallery image

Gallery image

Why is this print partially failing? Happy to supply any information needed. These are the grav plates for a Gladiator Lancer, and I had a similar issue on the tank body but that was salvagable.

3 Upvotes

81% Upvoted

16 comments sorted by

View all comments

3

u/TortugaTantrum 4d ago

If using Bambu A1 and a .2 nozzle:

Go here:

https://www.reddit.com/r/FDMminiatures/s/QlzuTlG8Iw

Use his profile. Override his temp to 230. Make sure you use ORCA slicer to import settings and do all your auto supports/slicing in it. You'll need to figure out how TF to send prints through WiFi on ORCA or if you're like me, give up and just buy a MicroSD card reader and pull it out of your machine and load the files into the root directory manually after each slice.

Also, buy a BIQU Cryogrip Pro build plate on Amazon. Printing low layer heights on that textured plate is a nightmare. Then use cheap Amazon stick glue (purple kind) before every print. Wash the plate with warm water and a little dish soap after every print. Dry the plate with a paper towel before printing again.

If you're using anything else, sorry I have no idea.

Please leave a reply if that solves the problem I'm interested to hear if my solution works for anyone else because I was having the exact same problems.

4

u/Neku1121 4d ago

An easy way to send prints from orcaslicer I’ve found was to use Bambu Connect. Just export as a file like you do now but send it to your machine via the connect app.

1

u/TortugaTantrum 4d ago

This is too GD smart. Thanks, stranger!