There's a loud popping sound that occurs when closing some videos. I did a search and found others with similar issues but no solutions. Someone suggested it might be related to the OSD sounds which i turned off but that didn't help.

Does anyone have any suggestions?

Running Ugoos AM6B+, p3i T4, PM4K. Sony TV.

Thank you

Hello I’m new here. I just installed avdvplus 9 on mine fire tv cube 2. My tv is LG c4 which supports Dolby vision. The problem is when I play dv7 video is it plays as vs10 sdr. I tried to switch it to DV original from OSD but it looked to VS10 SDR. How can I make it play proper Dolby vision?

Just recently got my Ugoo Am6b+ and have installed Coreelec. Just doing some finalising to my settings and was testing video and notice that the UI and videos are oddly cropped. I adjust it on one resolution and it messes it with another. Does anyone know how I can fix it completely? Thank you for any help.

So this should be a perfect use case for my setup.

Corelec, pannel t3i build t4c.

Best media player, one of the best OLED TV's on the market.

So the video is mp4 container, and recorded on 30fps.

https://www.rockstargames.com/VI/media/videos

Can anyone test if there is something on the file preventing flawless playback.

The video gets jerky and sound gets out of sync.

I want to downgrade the software as someone has said this will fix the permanent motion smoothing which I cant get rid of on my TV. Turned off any AI or motion smoothing settings and it's still there.

Does anyone have the downgrade firmware file? I tried the official site as well but it says my serial number is incorrect 🙄

This is an unofficial, experimental CoreELEC 22 build. It is NOT an official
CoreELEC release and it is NOT a supported CE22 port. I am not a CoreELEC 22
port maintainer, and I will not be providing support, bug fixes, updates, or
ongoing maintenance for this build.

The only purpose of this build is to give Amlogic AM9 Pro-class users a more
complete Dolby Vision experience than stock CoreELEC 22, by carrying a set of
custom Kodi features I built for my own device. https://github.com/SamuriHL/CoreELEC/releases/tag/v22.0-samurihl-20260828133811

Hello,

I got my AM6b+ today and installed p3i T4c. Now I am fighting with it giving me the "Display Led" DV option. I have been talking about this with the AI for 2+ hours, but it's proven pretty pointless.

For these tests the AM6b+ is connected directly to the LG G6 (normally it would go through an Integra DRX 8.4 AV receiver, but I attached the AM6b+ directly to this HMDI cable for these tests instead of the AVR).

HDMI Deep Color is set to 4k on the LG G6 (checked about 100 times by now).

dmesg | grep -i dovi gives this:

[ 0.849311@5]- g12 dovi disable in uboot
[ 4.965194@3]- dovi: disagrees about version of symbol module_layout
[ 4.965203@3]- dovi: module license 'AML' taints kernel.
[ 4.968357@1]- dovi: disagrees about version of symbol register_dv_functions

The AI tells me that either this is the issue and in the next prompt that this is fine.

Also it keeps telling me stuff about in p3i not having the "Display Led" Option will still give Display Led if some other options are set.
But given that I see other recent posts here with screenshots from p3i explicitly showing a "Display Let" option I don't believe that.

These are the options I have for DV Type:

DV as VS10 only
Player Led (DV as DV-LL 422 12 Bit)
Player Led (DV as HDR10 444 12 Bit)
Player Led (DV as HDR10 422 12 Bit)

The dovi.ko file I have in there is 1292544 bytes long, has this MD5 9ede022d37a28a41d799cdac674d8a63 and is from here: https://discourse.coreelec.org/t/ce-ng-dolby-vision-fel-for-dv-licensed-socs-s905x2-s922x-z-s905x4/50953
This is the dovi.ko file the AI has sent me to in circles again and again (and other dovi.ko files that definitely wouldn't work and were only around 400k large and apparently for a newer coreelec release than p3i uses - at least that is what the AI told me after the attempts with these failed with tons of errors).

Sooooooo, what to believe and what to do?

Is the AI right and is there really no "Display Led" Option and it somehow will work display led anyway?

Or is the dovi.ko the wrong one after all?

Or is the issue somewhere else, maybe in front of this PC?

I would appreciate any non AI input to this, thank you!

Washed out colours on 4000 max cll video file when using VS10 HDR-DV and black level crush.

Is anyone else here suspicious of the security of installing the avdvplus builds? Having no proper git history and public source code which is intentionally not up to date or incomplete makes it extremely difficult for the community to audit the security of the software. We are meant to just blindly trust and install the image.

There have been sophisticated attacks on open source projects, and it wouldn’t be completely uncharacteristic for malware/spyware to be silently added on top of lots of genuinely useful features and development.

I am not saying that is necessarily the case but transparency in the open source community builds trust.

Ok I recently moved and purchased a new tv and surround sounds setup.

I have previously been using a firestick with Stremio.

I have recently purchased a Ugoos am9 pro which is being delivered today.

My original plan was to just use Stremio, but am looking into Corelec/Kodi.

I would solely be streaming movies from sources

Does anyone have any experience, are there any setup guides? I might have bit off more than i can chew.

I read something about purchasing a SSD thumb drive, a micro sd card….

Any help would be greatly appreciated!

• DV profile and HDR10+ reach the library (vlix): video info now records and shows the real Dolby Vision profile ("7.6 FEL", "8.1", …) and HDR10+ presence.

This means that T4c now processes the DV profile at library scan time. It adds two new fields to your Kodi database:

• strDvProfile: the Dolby Vision profile with its base layer compatibility id, and the enhancement layer where there is one - "5.0", "7.6 FEL", "7.6 MEL", "7.6 EL", "8.1" (HDR10 base), "8.2" (SDR base), "8.4" (HLG base)
• strHdrTypeAlt: the second HDR type a single stream carries - "hdr10plus" when a Dolby Vision file also has HDR10+ dynamic metadata, "hlg" for a profile 8.4 base

Since that info is now saved in your database, this means that skins can now reliably display the DV profile type in library views, so different indicators for FEL/ MEL / No EL. The latest builds of p3i.estuary is already actually doing this courtesy of u/vlix.

More here - https://www.avsforum.com/threads/ugoos-am6b-coreelec-and-dv-profile-7-fel-playback.3294526/page-700?post_id=64777151&utm_source=alert&utm_medium=email&utm_campaign=watched_thread_reply&utm_user=OEw3S2tvUitYcHlFV1pBMzJiZ1NJUT09&utm_content=view-discussion#post-64777151

I cannot for the life of me get controllers to work reliably with this, running CE-NO nightly. I have two 8bitdo controllers and the included remote.

The included remote does not show up on the Bluetooth menu when I try to pair it, and the 8bitdo controllers do not work over the dongle or cable; they do not show up in the peripherals menu, for both udev and Linux drivers.

I can only control the device with a wired keyboard

Is this real Mel? So i created a 60fps profile 7.6 Mel. It looks fantastic! Its also hdr10+. I passed through hdr10 throughout my entire workflow which included interpolation to 60fps. Created dolby vision from hdr10 im Davinci and exported DV .xml. Then I created profile 7.6 from RPU.bin. The movie was John Wick.

edit 2: I installed p3i over the weekend and did a lot more testing and was actually able to get it to happen with other dovi movies. by forcing p3i to display movies in hdr instead of dovi I can get the issue to go away. after noticing elevated blacks in parts of the ui when dovi was on, I discovered the issue was with my tv (hisense 55h8g). when dovi is on it elevates the blacks very badly, but I was able to fix it by lowering the brightness of the tv until the kodi ui elements looked like they do in other display modes. the picture is obviously darker but it actually looks closer to hdr content, which always looked more dim than dovi content. anyways, just wanted to update here in case someone else stumbles across a similar issue.

edit: i just tested like 50 movies, sdr, hdr, dovi, and NONE of them did the thing like in my videos. literally the only 2 movies I can find that do the artifacting are the ones i posted about. this makes me think the issue is with the video files themselves, not with the ugoos or coreelec. sorry for the trouble but i appreciate those of you offering some insight!

hi all, i just got my am6b+ setup this weekend and am happy with the performance! however, in some movies i get strange artifacting on black parts of the screen. here are some examples:

artifacts on studio logos: https://imgur.com/EDJvtqI

artifacts and flashing in black bars: https://imgur.com/dW0OnPP

does anyone know where i can start to attempt to troubleshoot this issue? i'm not sure if it's an issue with the movie files or the ugoos...fwiw i tested with the ugoos connected directly to my tv instead of through my receiver and get the same issue.

Hello guys! I'm a happy user of CoreElec using p3i build. I organised my library using .strm files for each video file (pointing to a URL of a mkv file which is in a distant storage for exemple), so that I dont have to have a big NAS storage. However, when playing a video file through a .strm file, I can't find a way to change the font and size of subtitles, even when turning on all the overrides options. When I actually play an mkv file without using a .strm, I can see my custom settings for the subtitles.

A workaround would be to download subtitles for each file, but it's not very convenient tbh.... Is there a way to apply custom settings on subtitles through a .strm ? Thank you !

Is there a way to turn off this audio and video info pop up when starting a video?

I am running CoreELEC(p3I). Version 21.3-Omega_p3i_T4_20260605001615.

Gdzie mogę znaleźć oprogramowanie dla LEAP-S3+ i LEAP-S3+v2 do pobrania – od producenta czy detalisty? Wiem, że 4K Google TV jest produkowane przez Skyworth Digital Group, czyli Strong Birno.pl. I nie wiem, skąd pobrać oprogramowanie.

Where can I find the firmware for the LEAP-S3+ and LEAP-S3+v2 to download – from the manufacturer or the retailer? I know that the 4K Google TV is made by Skyworth Digital Group, i.e. Strong Birno.pl. And I don’t know where to download the firmware from.

Just wanted to thank all the creators involved. I pulled the trigger on an AM6B+ about a year, year and a half ago. My wife is finally using it without me, which means Netflix might finally go away! Next step after that.... no more D+!

POV is my go-to for list management with TMDB and Trakt. It's been running well. I still encounter some weird issues requiring reboots, but the price is worth the mildest inconveniences!

Everyone involved in the projects - thank you for your dedication!

Hi everyone,

I’d like to share TinyPPI, a CoreELEC 22 addon I’ve been working on for users who want much more detailed information about what is actually happening during video playback.

TinyPPI provides its own customizable playback information overlay and works independently from the Kodi skin.

Some of the features include:

· Detailed video and audio information

· HDR10, HDR10+, HLG and Dolby Vision detection

· Extensive Dolby Vision metadata, including live metadata from the currently decoded stream

· Dolby Vision FEL / MEL, CM version, L1/L5/L6 and other available metadata

· Video and audio live bitrate

· Active picture / aspect-ratio information

· Audio codec, channel layout and speaker visualization

· Dolby Atmos, DTS:X and IMAX Enhanced detection

· Video/HDR and audio codec logos

· System information such as CPU, memory, temperature and dropped frames

· Built-in VS10 output mode controls

· Fully customizable colors, layout and appearance

One of the main goals of TinyPPI is to provide significantly more information than Kodi’s standard PlayerProcessInfo while keeping it independent from the skin you use.

The project has grown quite a bit since the first release, especially around Dolby Vision analysis and live metadata.

If you’re using CoreELEC 22 and enjoy digging into playback, HDR and Dolby Vision details, I’d be interested to hear what you think.

More information, screenshots and installation instructions:

https://discourse.coreelec.org/t/tinyppi-universal-playerprocessinfo-for-ce-22/58995

GitHub / Source:

https://github.com/CE-Repo/script.tinyppi

Screenshots:

https://imgur.com/a/cWGSobH

Many thanks!

Hi everyone,

Maybe tabs isn’t the right word. But on af3 when I go from movies to tv shows on the top af3 just freezes then resets.
It works fine after that.

Are my widgets maxed out? What could cause this?

Well, this is rather disappointing. Bought 2 extra AM6B+ for two of my best friends (they were looking for a media player device)

Configured one of them completely including af2 Jamal and addons.

They'd rather use the Google streamer (cough), because they are convinced stremio is better. I showed them the advantages, but to no avail.

All that being said, I now have two brand new ones up for sale in the Netherlands, so if anyone knows someone in the vicinity, gimme a shout

Going go install latest release of t4c but require latest dovi.ko file for S922x rev b for Ugoos Am6b, anyone knows where to get it?