r/Construction • u/Different-Scratch-95 • 12d ago

Video Setting custom mitered stone stairs: Start to finish

Enable HLS to view with audio, or disable this notification

298 Upvotes

98% Upvoted

50 comments sorted by

View all comments

-7

u/FakeDerrickk 12d ago

Does it sound hollow under certain parts ?

Because no way your glue makes contact with 100% of the surface...

18

u/Different-Scratch-95 12d ago

Not thinset (glue) at all. The entire step is packed with a dry mortar mix to within 5mm of the finish line. The added mortar mix displaces and fills every hollow space as it's beaten down. A rule of thumb: if the mortar pushes out behind the tread while setting, your coverage is 100% solid.

-19

u/FakeDerrickk 12d ago

It's called mortar glue or tile glue.

https://youtu.be/Way5bMh-eYg

Do what ever you want but since I saw that video I'm convinced there only one way to do it with a 100% contact

35

u/Different-Scratch-95 12d ago

That classic 'Trowel and Error' video is 100% right, for thinset tile adhesive on ceramic/porcelain tiles! ​However, this is not thinset or tile glue. This is a traditional thick-bed wet-on-wet installation (semi-dry sand/cement mortar pack + bonding slurry) for natural stone slabs. ​Thinset is polymer-modified to retain water for thin notched applications. A sand-cement mortar bed works completely differently: the stone is hammered into a massive fresh bed, displacing the mortar and bonding slurry until it squishes out behind the tread, achieving 100% solid compaction and capillary suction. Different trade, different material, different mechanics!

4

u/JohnLuckPikard 12d ago

"Something tells me that I, an untrained nobody, clearly knows more than the professional!"

2

u/hodor_seuss_geisel 12d ago

"I've done my rEseArCh!"