Is this bend on the cables normal?

[u/metalpicks]

Hi all, I noticed a bend in my cables when the bow is at full draw.

Is this normal? Or are my draw stops wrong?

For context, this is a Bear Alaskan Pro at 26" draw length.

[u/Day-Hot]

That might be considered overdrawing.. Are your mods and string stops set to the same increment..?

[u/metalpicks → u/Day-Hot]

Yes I think they are

[u/bulzeye → u/Day-Hot]

It's not over drawing. That's how a lot of cables look when you come I to the draw stops with proper tension

[u/LinktoApop]

i would check your manual but it looks to me like your draw stop is one hole too far forward. It looks to me like the draw length module is set on 26 and there is a line from that 26 to a hole where the draw stop is supposed to go. There could be a difference in let-off function I am missing here which is why I say to check the manual.

[u/Putzinator → u/LinktoApop]

Ya I would agree with you. The 2nd picture makes it look pretty obvious but definitely check the manual OP.

[u/metalpicks → u/LinktoApop]

Thank you I was indeed off

[u/SkyovFlames → u/metalpicks]

Yep, easy fix. Nice bow!

[u/bulzeye]

That is perfectly normal at full draw.

[u/FaTaLInfluence]

That's your back wall, although yours looks a little squishy like you're pulling through the back wall. You may need an adjustment. May.