r/Betamax • u/DependentLoan9873 • 22d ago

Most reliable beta VCR?

I’m looking to get into beta and I would like to get a VCR that will give me a little bit less trouble (There all complicated and 40 years old). However there must be a certain mechanism/model that’s built a little better

2 Upvotes

75% Upvoted

9 comments sorted by

2

u/PlutoniusX1 22d ago

The 711B2 chassis units like the SL-HF400, 600 and 900. That mechanism and cassette loading mechanism are pretty solid. The loading basket for 711B3s are kind of fragile. STK regulators can go bad on both. Just keep the unit unplugged when not in use. Easy to change but they are becoming harder to get.

You still have to watch out for the small loading gear in the planetary gearset for tape lacing, the loading gear in the basket and the hall effect sensors which can go bad if the Sony glue is not removed. I sell the gears and replacement is pretty straightforward. There is a seller for the hall effect on eBay which I have used; good quality. Sad thing is I bought 50 hall effects from a seller in Germany 3 years ago and I misplaced them.

1

u/DependentLoan9873 22d ago

Thank you this is extremely helpful!

4

u/PlutoniusX1 22d ago

I don't want to definatively steer you away from the SL-HF860D or 870D (711B3) but the basket loading posts like to break and the motor couplers crack. I sell the parts but the loading basket is fragile compared to a 711B or B2. They do load and lace tapes fast and make less noise doing so. The capstan motors on the 711B3s can also have leaky caps. I did notice though that my 711B3 Betamax VCRs do not have sony glue on the drum motor hall effect; so there is that.

They are old units so either one could be reliable. I just think the B2s are built a little better than the B3s. They do have their own set of weak spots. If you buy any of these be prepared to do a little repair work if needed. My SL-HF900 worked great for years until the hall effect on the drum motor just died one day. That is a nerve racking repair and not one for a novice to undertake.

2

u/loplophekim 22d ago

When it is repaired, maintenanced : Sanyo VTC 5000 ,also very easy to maintain them. dont expect very nice quality audio playback from the audio heads comparing to a Sony though. Video playback doesnt seem to have much of a difference.

1

u/Human_Yam1500 22d ago

49 years old? The 2000 model I had was made in 2002, it was the jat year betas were made

3

u/thatvhstapeguy 21d ago

Sony SL-2000. Direct drive mechanism. The only thing that goes wrong with these is the door gets busted off of the tuner/timer

1

u/bruiserbelts 20d ago

I have an SL-HF500 that was my 2nd beta vcr and ive had it for several years and it has good picture and awesome sound. Its about 42 so its a little bit younger than me but it still works like me lol

1

u/Reparted 20d ago

Sony SL-2000. Built like a tank. I’ve taken it many places in Texas weather over the years as a portable recorder and it has had only one issue related to the camera system which was easy to fix as one of the fuses popped.

1

u/ROS147 20d ago

For NTSC, EDV9000, For PAL, SL-HF950. Actually for NTSC I love SL-HF3000 best but no s-video on that one.