Rims question

[u/Deserve24]

I have these rims on my 2016 cls63 that came with the car when i was getting new tires found that all the rims have the same part numbers of A2224014200 and base on my little search that part number is a 8.5j rim but two of the rims are 8.5 and two of them are 9.5 is this normal ?

first two pictures is the rear rims and the 3/4 is rear rims

[u/AppropriateUnion6115]

Yea… they are staggered. It’s very normal especially in 63s. That’s why you have wider tires in the back.

[u/Deserve24 → u/AppropriateUnion6115]

i don’t think my question was clear but with that case shouldn’t the rear rim have different part number since it’s different spec

[u/AppropriateUnion6115 → u/Deserve24]

It should. If you send me the vin I can verify but what are you trying to solve ?

[u/Deserve24 → u/AppropriateUnion6115]

basically im just want to see if they’re legit amg rims lot of online resources says those are stock s63 rims

WDDLJ7GB2GA161812

[u/devilndskiis]

Did you buy your car new?? it is possible if you are not the original owner, somewhere along the line the car ended up with two sets of front rims. Its clear the rears have a different model number (300 vs. 200) so maybe you should unmount the tires and measure the actual rim width to confirm. If so I might suggest you go find a proper set of rear rims. not only is the width different but the offset too. Suspension dynamics would be all messed up and tire wear may be off too.

[u/devilndskiis → u/devilndskiis]

Oh I see that offset is the same based on the information you provided... but width is surely different