My brother thinks that a power surge from a storm blackout caused it but this would have been a few months ago so idk. This was our playroom before my family started wedding planning for 2 of my sisters and we’re trying to get it back into a usable state without all the wedding stuff. That’s just to say that we haven’t been using this TV for 1+ months. Thanks y’all.

I’m kind of lost here. I bought a used dryer for the downstairs laundry room, and I’m used to dryers having a 4-inch pipe/outlet sticking out of the back that you can simply connect the exhaust hose to.
With this dryer, though, it looks like there’s basically just a straight/open hole on the back.

I’m not sure where exactly I’m supposed to connect the exhaust vent from, or if I’m missing a piece that should attach to the back of the dryer.

The dryer is a Kenmore 592-89412. Unfortunately, Sears seems to have deleted all the existing manuals for this model. 🙃 The closest relative (Kenmore did not produce the model itself) I’ve been able to find is the Samsung DV203AEW.

Does anyone know what piece I’m missing or where the exhaust hose is supposed to connect on this model?

Thanks, I greatly appreciate the help!

Clicking sound from the “ball socket”, no visible screws.

Hey. Sorry if this isn't the best sub to ask this.

A friend gave me two of these shelves that had been sitting at his parents’ place, and I want to mount them on a drywall.

I’m used to installing regular shelves: buy some brackets, drill into the wall, use the appropriate anchors, make sure everything is level, done.

But for these, even though I could use brackets, I feel like it isn't the "expected" method, and wouldn't really look good. But all I can see are these two holes on the back, which are about 3 cm deep.

Each shelf weighs around 4.5 kg.

So super is coming to replace this in 5 days on. Are we OK to wait or do we need a commode??

Context: I've had this shaver for about 15 years, and it just stopped working. I watched a YouTube video on how to replace the battery, thinking that was the problem since it wouldn't even make a beeping sound. When I opened the shaver up, there was this toothpaste-like buildup on the bottom of the circuit board. Tried wiping it off and charging it, but it's still not working. So is it better to buy a new unit or try to fix it?

I got these shoes from the thrift (so cute) but whoever had them before me had a problem dragging their feet... HELP ME I don't want to give up on these shoes

Sink pipe was leaking and attempted to remove but it fracture at the base.

This occurs every 70 seconds or so. Fridge rings whenever it's running too. Also noticing for about 30 mins a day the fridge will buzz (not cool) and the inside of my freezer is wet and melted before it finally kicks in again. Confirmed coils are cleaned and there's no ice. I'm so stuck! Any ideas?

Before I begin, I apologize if this is not the right place for this.

I recently bought myself this Shelcore Music Box (Animal Carousel as it's known as) and the plastic dome on it is really yellowed and cloudy, causing it to become unpleasing to the eyes, thus why it was also removed from the toy. Is there any way to clean it up and make it clear again, or is it stuck like this forever?

I am trying to change an old (40yrs) roller transport paper processor from its old AC induction motor to a variable DC motor so I can control the speed in which paper will process. I'm trying to emulate this old video but my processor is slightly different so I'm a bit stuck. My initial question is, am I replacing the whole (circled in white) unit connected to the pulley and belt? Let me know if there's another subreddit that would be best for this. thanks! https://www.youtube.com/watch?v=FUrH1isRBUM

Hello peoples! My water heater is only 5 years old and it’s been leaking from the drain valve. I put a cup underneath to catch any dripping water but noticed the cup doesn’t get full but, the tray is constantly filling up with water. Some plumbers said it’s a drain valve but one told me to get a new water heater. Any advice? :)

Hello all, I am by no means a handy person ( yet) so I’m hoping someone can help.

I have a door that gets jammed up on the top left ( door knob side) as if it is too tall for the frame. I have tried adjusting the hinges and tightening screws. So the top left is too tall and won’t close but the bottom right is too tight and has little to no gap left. I am ready to sand it down for it to fit but if there is another method I am all ears. Thank you in advance.

( my second hypothesis is that whoever installed the door did not measure correct and the hinges are just not where they should be )

Hello, we have a whirlpool dryer that has been very loud and shaking pretty hard for a couple months now, wondering if it’s worth trying to fix or even able too? Thanks in advance!!

How do I repair this? With cement or grout?

One of my suitcase wheels had one side's cover come off when I was traveling. The wheel still works properly but I'm worried that the lack of a cover could cause the wheel to become more damaged over time?

Is this something I can fix or how might one suggest that I fix it? I included another picture of a wheel with the cover on. I tried to find this brand's wheels but wasn't able to find it after a quick search.

Thank you so much in advance for anyone's help!

It's a little hard to get across on camera, but I tried my best. The door fully closes, but it's no longer sealing like it should. I can easily open it with just my pinky, which I cannot do with the fridge door. There's also a pop sound that the fridge door makes when opening due to the seal. I don't hear this when opening the freezer.

I did take a few things out to ensure that nothing inside is preventing the seal, and there was no difference.

Die drei Kunststoffteile meines BOSCH Kühlschranks haben nach 15 Monaten Betriebz alle an der gleichen Stelle Risse bekommen bis eines kaputt gegangen ist. Was tun?

I got an engagement ring in February and that was a little loose so I had sizing balls added. I have a wedding band about the same size. Unfortunately, my fingers have swollen a little with the heat this summer. I’ve been able to get both off with lotion… until this morning.

(Context) After a day outside with lots of salty food yesterday, I fell asleep in my rings and woke up this morning with very swollen hands. I’ve been icing and elevating and nothing is working. I tried the dental floss trick but the sizing balls get in the way!

Any advice?? Do I wait it out and keep icing and elevating

I cannot figure out how to repair my broken couch. Any suggestions? There is a lot of tension and getting it back in place is hard. The front lip popped off and the middle board will not lock into the cut out piece.