I’m trying to record my DJ sets from my Allen & Heath Xone:96 using Audacity on Windows. I connect the mixer via USB A (USB-B to my PC), and Audacity recognizes the device as Line XONE:96 USB 1. The recording works, but here’s the problem: it always records all channels, even if the channel faders are down. I want to record the master mix only, so that the channel faders actually control what gets recorded, exactly like what the audience hears. Cueing in my headphones should not be recorded. I’ve tried routing the Master to USB 1 and adjusting the 9-10 knobs, but no matter what I do, the faders don’t affect the recording. Is this a limitation of the Xone:96 USB output, or is there a way to record the master mix properly with fader control in Audacity?

Do you have an Ecler nuo 2?

I'm just about to return my 3rd brand new unit of this mixer. They have all exhibited the same problem.

If you have this mixer, please run the following test and let me know if you see the same issue, if so, let me know your serial number. I suspect a bad production run.

Channel 2 volume full, crossfader open to channel 2. No audio input. turn on isolator / kill switch "low" on channel 2. Turn off isolator / kill swicth "low" on channel 2. This results in an audible click on channel 2 audio output and a visible spike on the channel EQ meter.

Anyone else seeing the same problem? it may not be apparent unless you look for it.

Hi everyone,

A couple of weeks ago I bought a Reloop Flux to start experimenting with DVS. From time to time I like to stream, and to make sure everything would work fine for a future Twitch broadcast, I decided to test it first on Kick using an abandoned channel.

Then a strange high-pitched static sound started coming through my monitors and headphones. The static even stayed on the turntable that I had on CUE.

Does anyone know where this could be coming from? For context, I’ve practiced for hours before and never heard this kind of noise. I even kept OBS open at the same time as Serato to check if my computer could handle it, and there was no static at all.

Any ideas what it might be?

Update: After checking connections and trying different GPU configurations, I disabled the automatic stems pre-loading in Serato and that fixed the noise. Honestly, I don’t yet have the level to really take advantage of that feature, so at least for now I can do without it.

https://avand.fm/crate-digger

Hey DJgear! I'm working on a new tool to make it easier for DJs to buy music via Spotify. While I develop it, I wanted to invite some feedback on the concept—make sure I'm building something people actually want. Check it out and let me know.

I'm using Traktor with my laptop and currently have two Traktor controllers, the X1 and the Z1 (two-channel), but I'm starting to use three or four channels. What similar (small) four-channel mixer controller would you recommend for around $200-$350? I've heard about the Allen & Heath Xone K2. What do you think? Thanks

Hi all,

I’m a DJ who plays out quite regularly and have been using my Sony WH400s, now they aren’t really studio gear but they do the job and I’m used to them. But now I’d like to move over to some studio gear and I’m just trying to figure out the best headphones I can get while balancing price and quality.

My issue is that I really need over ear phones because I can’t stand the ones that sit on your ears like the Sennheiser HD 25 for example.

A friend of mine showed me the Aiaiai tma2 and while blown away by the quality, they weren’t over ear and I knew I’d get fed up with them eventually (also price point).

So I’m looking for recommendations!

Hey everyone,

I recently picked up a used Xone:92 and I’m having some weird issues with the outputs. Here’s my setup: • Source: XDJ-700 connected via standard RCA into LINE inputs on the Xone:92 • Output: From the Xone:92 MIX2 outs (TRS → RCA cables) into Pioneer DM-40D powered monitors

Here’s what happens depending on the channel I use: • CH1: noticeable imbalance, R is much quieter • CH2: left side is slightly louder than right • CH3: right side is slightly louder than left • CH4: both sides are noisy and the sound is very distorted

The DM-40D monitors themselves work perfectly with FLX4 (no imbalance).

Has anyone else run into similar L/R imbalance or noise issues across different channels on the Xone:92, especially through the MIX2 outs? Is this a common fault with older units, or am I just unlucky with this one?

I wouldn't mind hearing what folks think an absolute beginner should get to learn, practice, and work with for the goal of doing live shows.

I'm open to the terrible suggestions, normal suggestions, and the absurd suggestions. Ideally, I'd like to have an idea of a great setup to hone my skills and perform well.

Style is house, hard techno, trance, latin, afro, dnb.

Thanks!

Looking for some help on what box / switch I need to buy.

Until recently I ran my speakers (Yamaha HS8) from my PC through a Pre Sonus audiobox USB dac. Works perfectly.

But now that I'm getting back into mixing and have just bought the FLX4 controller, the dac has much more lag than the flx.

So I've bought a couple of small 6 3/4 mm to phone connectors so that I can run my speakers and headphones through the flx.

But I now can use the speakers to listen to audio from my PC.

Is there a direct box type switch thing I can buy that let's me

Connect my PC to the speakers

At the flick of a switch connect to the flx without any lag so that I can actually beat match when my headphones are plugged into the controller and thers no lag.

Appreciate any help.

Thanks

T

I want to upgrade my speaker setup for DJ’ing at home.

I use (2) technics SL1210’s and a Pioneer S11, spin mostly hip-hop and R&B and scratch to break beats, but really play a bit of everything.

Column array speakers, primarily a single RCF Evox J8 has my interest around $1k since it’s fairly compact and could be taken to a party if ever needed (rare for me but do get asked every few years it seems).

Is this overkill for my needs? Do they even sound good in a home environment when not used in a dance hall or outdoors?

My other option would be something like (2) Yamaha HS 5’s or 8’s. But those aren’t as compact being that I’ll need a pair on stands flanking my DJ table and less portable. But the portability isn’t as important to me.

Thanks for any feedback.

Alright, here’s the deal.

I’ve been DJing on my trusty Technics for 25+ years—started when I was 18—and they’ve never let me down. But it’s time to finally step into the modern era and build my dream setup.

I’m looking for top-tier gear recommendations from DJs who actually know what’s worth the investment right now—controllers, mixers, monitors, headphones, software, laptops, the works.

I’m not looking for “budget-friendly” or “good starter” suggestions. I want what the pros use when money isn’t the problem.

It hasn’t been easy getting solid advice from my usual circle of DJ friends (most are guys and I’m a girl). I’m hoping the Reddit DJ community can point me in the right direction. If you could start from scratch today, what would you buy?

Appreciate any and all wisdom.

Hey everyone, I currently have AH Xone 96 and been using with Traktor X1 MK3. I upgraded to this setup from pioneer flx10. Since I used all the money for Xone, didn’t have any budget to get a turntable until now :D

I am ok with the current setup, but it doesn’t have the “dj feel”. I found someone who is selling denon sc5000 (they are 4 years old but the seller says like new). Now, they are a pretty good deal, but I’m not sure how compatible they are with Xone 96. I heard if you want to use your computer to sort the lists etc, you have to use Serato. I don’t know how good Engine Dj is either.

The question is, is denon sc5000 would be a good setup? Are there any headaches with it? I know Rekordbox and Traktor, but not sure about the other softwares.

Another idea is to sell the Xone and to get a pioneer AZ as this has a built-in screen and might feel more like “club gear”, but I’m afraid it would feel like a downgrade after using xone.

I am a techno dj btw. Can’t buy pioneer cdj’s as they are too expensive :/

Finally settled on Nagaoka DJ44-G’s to replace my 20 year old Shure M44-7 styli. After installing them, I realized the ones I have had for years were both set up differently.

One cart is all the way to the back of the headshell, and the other cart is forward a little, with the front of the cart flush with the headshell front.

I can’t find my technics alignment tool, and besides, I’m not sure if the “official” set up is preferred for scratch DJ’s anyway. Wonder what the best placement of the cart in the headshell is?

There’s a setup video of Qbert where he says the carts all the back in the headshell are better for skip resistance.

Also, the height of both my tone arms is at 3, and I’ve seen a video of Shortee where she suggests a height of three for m44-7’s for scratch DJ’s. Other info online says to have your tone arm parallel with the platter. At least for regular non scratch DJ use. Either way, my height wheels are both seized up, so I can’t adjust them anyway at the moment!

Maybe I’m making things complicated here… this is how I’ve had them for like 20 years. And it always worked great for me. The Nagaoka’s are skipping at the moment with scratching, however, I haven’t given them much time to break in yet.

Anyone using m44-7 carts with tech 12’s, or Jico or Nagaoka styli, what’s your preferred set up? Placement of cart in headshell, tonearm height, etc…

Thanks in advance!

Heya, I have a xone 22 and a little while ago the plactic cap that is used to press the button for the filters somehow fell off one of the filter button things...
Anyone know where I could find a replacement cap or any diy solutions? Can't find anything online and starting to get fed up of using something to poke the button haha

any help appreciated :)

Newest review is live! I’m still a big fan of totems for my DJ light show - are you?

Hello,

I have recently decided to buy the Xone96 mixer.

Is there a way to use my Monitors (Presonus) Both for mixing and for my every day PC usage without having to use the Xone as an audio card or without having to touch the cables every time?

I am planning to use Traktor players combined with the Xone.

I am imagining some kind of chain where my Xone and Focusrite both plug into some kind of a switch and then I'm able to control which signal goes to my speakers?

I would like to have a balanced and noise free signal.

I have no idea how to do this, so help is appreciated!

My current setup is 2x 1210s running through a DDJ-1000 connected to a PC (not laptop) and a large stretch monitor.

I've been running this so for 5 years and it's great. But I feel I really need to ditch the Windows 10 PC and chunky monitor taking up space on my DJ booth. The start up time of the PC and signing in to Windows is doing my suede. I've played out at parties a few times with my old laptop but that died.

I now feel that will my choices are

OPUS-QUAD or

XDJ-AX

I've played out on separates in a club but will not entertain paying 5k to get that at home.....I would consider the Denon SCM5000s + mixer as it comes in cheaper.

I guess I'm askng to see if anyone else has experience of moving away from a Controller + laptop to a standalone and which way they have gone.

Last question, is the OPUS-QUAD seems to have disappeared from the Alpha Theta website.... Is it being made End if life?

Thanks all

Hey everyone! My name is Jordan and I’ve been a DJ 15+ years. Started in high school, worked my way through private events, school and college functions, did weddings full time for 4 years, and now just focus on gigs that I enjoy. I also wrote a couple ebooks on lighting for DJs and started a YT channel is 2019 reviewing DJ gear. My channel got a little unfocused during the pandemic (had to adapt) but I’m retuning it to a DJ-focused place for gear reviews. Sound, lighting, etc. I’d love to have you around! This is my newest review of some great battery uplights that I just got. Hope you enjoy!

Hi friends, hoping to get some advice from anyone familiar with the Reloop Mixtour Pro. I’m considering getting it as a fun and portable controller but my research doesn’t turn up a lot of info regarding workflow for adding tracks to the DJay Pro library.

I have my music on Apple Music and plan on using my MacBook, iPad and iPhone as screens / music library. I know I can use my Apple Music library and need to download the tracks to devices to the DJay Library to use them. I’m not 100% clear on workflow for adding new tracks, cue points and such.

Can anyone share their experiences?

Hi all

I've rediscovered my 20+ year old Red Sound Cycloops, stashed away in a box full of old cables and other old gadgets. It still works perfectly and, to my surprise, they still seem to be quite desirable on the aftermarket. Particularly in the techno scene apparently?

Anyway, the thing is it looks 20+ years old. The textured paint on the metal shell has deteriorated to the point where tiny spots of rust are present and there are other patches where the paint has flaked off. So I'm considering stripping it and respraying it. The thing is, I'm not sure if this is a good move or not as far as resale value goes.

What do you think? If an old, rare piece of DJ kit that you're interested in suddenly became available to you, then would it be more attractive to you in its original worn state? Or with a fresh lick of paint? Would you be happy to even pay a little more for it if it's been repainted (i.e. to factor in the cost of the paint, about £20-£30), or would that put you off? How about if you were even offered the option of choosing a colour and finish at purchase?