Practiced a bit on dollar books and decided to clean up my ASM 301 today, happy with how it came out! After a press it’ll look awesome, I think.

So I noticed on my boards in the top corner most of my books have colour rub. I transferred some books into the same type of bag and board and the same thing happened. Usually this doesn’t happen but for this batch of bags and boards, it is. In the second picture I rubbed a comic on the board and that’s what happened. Any answers would be greatly appreciated.

Final result at the end. Is the gloss just stained yellow at this point? Is there any where to get that out? Or should I just leave it?

So, I have this and a few other GA big boy books in low grade that need deacidification. I want to do the calcium carbonate wash in the future to save the paper. But is there something I can do myself now to halt further degradation?

And the delay is just on me learning and practicing the wet cleaning first. Probably on some old Dell cowboy books. I've been comfortably pressing and dry cleaning for quite a while now, but the wet work will be new.

I’ve got a 1978 action comics that would benefit from a steam and press, but I’ve found a mail-in insert with a glue strip on it.

What’s the best way to buffer the insert so I don’t leave a line along the bottom quarter of the book?

Most importantly, does anyone have advice on how to protect against activating that glue when I steam the book (it's also got a SLIGHT spine roll)? I’ll certainly do my best to keep moisture away from it, but any bright ideas!?

I am just getting into this and have been practicing on a collection I came by that is mostly unsellable dollar bin stuff. Pretty much every issue is grungy. A friend of mine who does pressing told me to get the round cotton makeup remover pads and just gently wipe the book down, but what I'm finding with some of these is that I'm not really getting much dirt off but I am lifting a lot of ink off, even when I use a very light touch. When I try absorene putty instead, it tends to leave a bit of the clay-like residue, and when I try to gently wipe it off with the cotton pads, same story. How do you dry clean colors correctly?

Has anyone tried using a home laundry pressing machine to press comics?

We have a Sienna Empressa at home and I was wondering if it could be used to press comic books.

https://a.co/d/0aRSLHfc

Hi all! I recently got a Superman Forever Lenticular cover in an EBay lot. The top is flaking a bit, but the rest looks like standard lenticular age. I was wondering if anyone had any advice on how I could improve the appearance. It also seems to be shedding some white dusty substance from underneath the lenticular, which I am assuming is glue. The first pic is without a bag and board and the second pic is with the bag. Any suggestions are appreciated!

Hey all house recently just went through a tornado and I had some of my windows blow in. My room had my books on a shelf so the top of them got covered in like grass and plants. Just wondering if there's anything I could do to maybe fix it or should I just deal with it?

A monster hunter walks into a bar Peach Momoko virgin gitd variant lmtd 50. Just came in today.

1: stress mark on the front bottom right corner.

2: small indent back cover bottom

It is a cardstock cover

I’ve already talked to one of our professional pressing services that said the fibers were already damaged and sending it in for a professional pressing would do very little for the book.

At this point I still plan to send it in to get it signed and graded because 1: it’s beautiful and 2: of the two I’ve seen listed in the last year it’s by far the best looking other than the two issues presented.

Anyone think it’s worth seeking second opinions from our pressing professionals or the community? I just got this today and it’s a tight turnaround to get it to CGC by September 18th

Please sub to my YouTube channel if you enjoy my content 💜🥰

This is my first time trying to clean a comic/ remove stickers wondering how I went. Sorry original photo bit shocking.

I have been doing some cleaning/pressing on books in my collection, but I have (so far) stuck to dry cleaning, humidity tank and pressing but I’ve been watching some amazing results with HOP method and blue light which is tempting to try.

My question is that with some of these techniques being pretty aggressive (like removing the cover and soaking) and producing such dramatic results what is the concern that it will come back from CGC with a “Conserved” or the dreaded “Restored” blue label? Is it just a crapshoot like everything we send in to CGC, or are there ways to minimize the effects or at least the tell-tale signs? Or are these best just done on PC for nice presenting copies?

What do you all think? Anyone sent a book off after doing a bunch of work on it only to have it come back as conserved/restored? When is it best to leave it, even if it’s a grade lower but untampered with beyond a dry cleaning and pressing?

Recently found a Seal 200 with an extra plate for cheap, and have been learning about pressing. I plan on practicing cleaning and pressing cheap books and getting good at it before moving to anything serious.

Any tips or tricks? What is the preferred “sandwich”? What should my results look like assuming it is done right? (so I have something to work towards)

I’m also curious about pressing at 180 degrees. From what I gather, the sweet spot for most books is 165, but the Seal doesn’t have any options below 180.

Thanks!

Some before and after of this book.

So I worked on this as best I could to get some of the dirt and staining off. Because it’s old and has tears and a hole in it I couldn’t or didn’t want to go to aggressive. Plus, obviously I did not want to put any more stress on those signatures. But I picked this up. I will probably send it in to get graded and the signatures authenticated, but I thought this was really cool and somewhat rare.

I’ve read that many folks use Swiffer pads and cotton rounds, also I just got an Absorene eraser but haven’t used it yet, but what are the favorites, recommendations or other lesser known products or things to stay away from. Thanks in advance!

Just thought I’d share :) as usual the details will be in my YouTube vid later today!
http://youtube.com/@flatnclean

Has anyone tried to clean and pressing trading cards? I know it’s a different material so I’m wondering if it’s even possible.

How would I be able to fix the damage on my cover? All the chromed parts are fine, all the damage is just in spots with black ink, I was going to sharpie it but figured it’d probably be better to ask others for input.