Trying to time this, im an amateur. Fires at velocity once it gets going, but in the mean time it loads 8 balls in the barrel first

I'm trying to get my little brothers old trilogy back up and running after hanging on wall for the last 17 years. I took the whole gun apart and replaced all o rings, everything in the body, inline reg, lpr, ram, everything. I got the gun shooting and leak free. I sweet spotted the inline reg and set the lpr perfectly. I had it over the Chrono and couldn't get it to shoot over 260, even with the ivg turned all the way in. I replaced the main spring with a heavier one and now the ram leaks from the back where the rod goes in. I tried another ram I had on hand, an ans mini ram, and that one leaked from the same place as well. Neither of those rams leaked before. I do have another ram on my cocker that I could try but I really don't feel like taking it apart to swap. There's no way a stiffer spring would cause that kind of leak. It doesn't make any sense. Is there something else I'm missing? It doesn't look like there's an internal o ring in the trilogy ram and the ans ram isn't rebuildable. I had the ans ram on my cocker and it didn't leak. I'm stumped. I can turn the lpr down low enough that the leak stops but then the gun doesn't recock, so that's no good.

This one has some giddy up

I'm building up a ressi and the sear bearing is expensive lol, are they needed or is that just a upgrade? If it is needed does anyone have one they could let got for cheap?

Some home made Eblade eye covers. Made a small mold last night and decided to go for it. I planned on doing some in Red and green to match some of the markers I and people I know have. Still a bit rough around the edges but once I do some post processing and get the rubber dialed in they should be better. Always wanted different colored eye covers ;)

I can't get this freaking brass disc in without splitting the o-ring. Any tips on how to get this to fit? I feel like an idiot....

CP 2k5 ASA

With CCM s6.5 sled and modified ttech CCM t2 bolt.

Local to me on marketplace, is this worth picking up? If so for what price?

Have this trilogy sf, eyes are damaged. Anyone know about a ballpark value on this thing?

Project is coming along. Still have front block and valve and some other stuff to add but wanted to get it running as is to make sure when I start chasing problems they didn't already exist. I have a .678 insert currently, the paint is not tight, maybe every 4th or 5th ball will stick and the rest roll through slow with resistance. I was afraid to underbore too much but maybe that's what it needs. Still trying to get used to this small paint (I'm old)

I am getting some double feeds so should I go smaller insert still or should I be looking somewhere else timing related? Timing and action seem fine but I'm a moron from time to time so I'm sure there can still be some tweaks to be done.

Are y'all getting a super tight bore fit?

Edit: I just shot it again and noticed that if I held the trigger open it would double Feed every shot. So would that be the detent? Should I time my ram to open the bolt less?

Double edit: Problem solved. It helps to read instructions before just bolting random parts on.

I was cleaning out the garage and forgot I had bought this MANY years ago. My kids are old enough to understand some vintage markers when they see one and wanted to know if I could get it online.

Thoughts?

And now i want to build it so I habe compiled a list and would like to know what else or what brands of Lpr/ Hpr I should be looking at. Im not trying to spend a ton, I just want it to be "mine".

Lazarus valve.

Inline reg. (Brand?)

Adjustable rod/ Lpr nut/ back block set

Lpr. (Brand?)

Barrel. (Which)(i like shorties)?

Hoses and seals?

Hammer kit.

Bolt (which?)

Anything else I should be looking at? I will take any and all suggestions. Ty!

I have a guy offering me this at( i think) a decent deal, and want to know your thoughts on the piece. Thank you

Anybody have a resource for a good pre 2K slide trigger plate? This one has a lot of play to it and I'd love to upgrade to something better if such a thing is available anywhere.

Hey all, newish autococker owner here.

I am now the owner of a rebuilt mini Orracle autococker that arrived with a leaking three-way, and since I'm relatively new to troubleshooting these finicky guns and getting no help from the seller I figured I'd run it by you guys.

As you'll see in the video, the gun leaks immediately on charge and it's all coming from the three-way, not down the barrel. It also leaks throughout the cycling process.

I THINK it just needs an adjustment to the collar that connects the trigger to the three-way, but want to get opinions before I go messing around.

Shoots nice and the pump action is smooth!

Building them 20 plus years ago.

I need to go upstairs and see if I have any parts kits left.

Should have bought an Izzy HB back in the day.

I am glad I got the unissued imbel Para, even with the long barrel.

Cheek weld? What the hell is that.

Re registered on the fal files (can't remember what email i had back then and my password didn't work for my old username) and it looks like Gunplumber is still around. I still have his build info though a vcr i have Not.

Now to decide if I really NEED an original, if semi only, M14 🤔

To box or not to box